Maxim Integrated MAX14913AKN+ 8High Side, Push-Pull Driver Power Switch IC 56-Pin, QFN
- RS Stock No.:
- 164-5245
- Mfr. Part No.:
- MAX14913AKN+
- Brand:
- Maxim Integrated
Stock information currently inaccessible
- RS Stock No.:
- 164-5245
- Mfr. Part No.:
- MAX14913AKN+
- Brand:
- Maxim Integrated
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Maxim Integrated | |
| Power Switch Topology | High Side | |
| Power Switch Type | Push-Pull Driver | |
| Switch On Resistance | 230mΩ | |
| Number of Channels | 8 | |
| Maximum Operating Supply Voltage | 36 V | |
| Maximum Operating Current | 1.5 A, 22A | |
| Mounting Type | Surface Mount | |
| Package Type | QFN | |
| Pin Count | 56 | |
| Maximum Operating Temperature | +125 °C | |
| Minimum Operating Temperature | -40 °C | |
| Dimensions | 8.1 x 8.1 x 0.85mm | |
| Series | MAX1491 | |
| Select all | ||
|---|---|---|
Brand Maxim Integrated | ||
Power Switch Topology High Side | ||
Power Switch Type Push-Pull Driver | ||
Switch On Resistance 230mΩ | ||
Number of Channels 8 | ||
Maximum Operating Supply Voltage 36 V | ||
Maximum Operating Current 1.5 A, 22A | ||
Mounting Type Surface Mount | ||
Package Type QFN | ||
Pin Count 56 | ||
Maximum Operating Temperature +125 °C | ||
Minimum Operating Temperature -40 °C | ||
Dimensions 8.1 x 8.1 x 0.85mm | ||
Series MAX1491 | ||
The MAX14912/MAX14913 have eight 640mA smart high-side switches that can also be configured as push-pull drivers for high-speed switching. The propagation delay from input to switching of the high-side/low-side drivers is 1μs (max). Each high-side driver has a low on-resistance of 230mΩ (max) at 500mA load current at TA = 125°C. The device is configured and controlled either through pins or the SPI interface. The SPI interface is daisy-chainable, which allows efficient cascading of multiple devices. SPI also supports command mode, for the highest detailed diagnostic information.
Low Power and Heat Dissipation
High-Efficiency
Fast Switching Ideal for High-Speed Control Systems
Fast Inductive Load Demagnetization
Robust Operation
Robust SPI Interface with Watchdog and CRC
Open-Wire Detection in High-Side Mode
Low Supply Voltage Warning
Undervoltage Detection
Overvoltage Detection on OUT
Overcurrent Detection
LED Drivers for Visual Fault and Output State Indication
High-Efficiency
Fast Switching Ideal for High-Speed Control Systems
Fast Inductive Load Demagnetization
Robust Operation
Robust SPI Interface with Watchdog and CRC
Open-Wire Detection in High-Side Mode
Low Supply Voltage Warning
Undervoltage Detection
Overvoltage Detection on OUT
Overcurrent Detection
LED Drivers for Visual Fault and Output State Indication
Note
Please note that any defect or non – conformance of this product must be discovered and reported to RS within 20 days of purchase.