ROHM Evaluation Board for IC

The ROHM evaluation board outputs an isolated voltage of 12 V from an input of 90 Vac to 264 Vac, and the maximum output current is 2.0A. It is PWM method DC or DC converter IC built-in 730 V MOSFET is used. Built-in the low on resistor (1.0 Ω) and high voltage tolerant MOSFET (730 V) make designs easy. PWM controller for AC or DC power supplies and It provides the optimum system for all products with outlets.

PWM Current Mode
Frequency Hopping Function
Burst Operation at Light Load
Frequency Reduction Function
Built-in 730 V Startup Circuit
Built-in 730 V Switching MOSFET
VCC UVLO Under Voltage Lockout