STMicroelectronics X-NUCLEO-IHM05A1 X-Nucleo-IHM Stepper Motor Driver for STM32 Nucleo Boards

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

X-NUCLEO-IHM05A1 Bipolar Stepper Motor Driver Expansion Board

The X-NUCLEO-IHM05A1 is a bipolar stepper motor driver expansion board, based on the L6208 driver for two-phase bipolar stepper motors. An affordable and easy-to-use DMOS driver for bipolar stepper motors in STM32 Nucleo projects. The board connectors are compatible with the Arduino UNO R3 connectors, and the STMicroelectronics Morpho connectors. The addition of other STM32 expansion boards is supported.

8 V to 50 V operating Voltage
Up to 2.8 A RMS output peak current per a phase
Dual independent PWM current controllers
Fast and slow decay mode selection
Logic sequence generation for stepper motors
Full-step and half-step mode drives
Overcurrent protection
Thermal protection shuntdown
Compatible with Arduino UNO R3 connector
Compatible with STM32 Nucleo boards

Motor Controllers & Drivers, STMicroelectronics

Specifications
Attribute Value
Power Management Function Stepper Motor Driver
Kit Classification Expansion Board
For Use With STM32 Nucleo Boards
Kit Name X-Nucleo-IHM
38 In stock for FREE next working day delivery
Price Each
£ 9.94
(exc. VAT)
£ 11.93
(inc. VAT)
Units
Per unit
1 +
£9.94
Related Products
Supports up to 20V Output Pull-up Voltage–40°C to ...
Description:
Supports up to 20V Output Pull-up Voltage–40°C to 125°C Operating Temperature Range Supports Wide Range of Stepper Motors, DC Motors, Relays, and Inductive Coils Low Output VOL of 0.4V (Typical) With– 140mA Current Sink per Channel at 5.0V Logic Input(1)– 1A Current Output when all 7 Channels Tied in Parallel(1)Compatible ...
The LB1938FA is an H-bridge motor driver that ...
Description:
The LB1938FA is an H-bridge motor driver that supports low-voltage drive and features low-saturation outputs in an ultra-miniature slim package. The LB1938FA provides forward, reverse, brake, and standby modes controlled by two input signals, and is an optimal DC motor driver for notebook personal computers, digital cameras, cell phones, and ...
The LB1909MC is a low saturation voltage stepping ...
Description:
The LB1909MC is a low saturation voltage stepping motor driver IC. It is optimal for motor drivers in 12V system products. Current consumption 0 in standby mode The compact package (MFP-10S) is adopted. VCC max = 20V, IO max = 0.8ABIP output transistor adoption (Upper and lower total Vo(sat)=0.5V(typical) at ...
The LB1939T is a constant voltage driver for ...
Description:
The LB1939T is a constant voltage driver for single stepping motor. It is optimal for motor drive in portable system products. (Battery drive available ). Low voltage drive Dual power supply operation Vs=1.6V to 7.5V VDD=1.9V to 6.5VSingle power supply operation Vs=VDD=1.9V to 7.5VLow saturation voltage Vosat=0.3V at Io=200m ASupports ...