STMicroelectronics X-NUCLEO-IHM03A1 X-Nucleo-IHM Stepper Motor Driver for STM32 Nucleo Boards

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

X-NUCLEO-IHM03A1 High-Power Stepper Motor Driver Expansion Board

The X-NUCLEO-IHM03A1 is based on powerSTEP01, a system-in-package, integrating a microstepping controller and 10A power MOSFETs in dual full-bridge configuration. The board can drive high power bipolar stepper motors in your STM32 Nucleo project. The fully digital motion control offers high levels of performance and robustness, through speed profile generation, positioning calculations, and a complete set of protection features. The X-NUCLEO-IHM03A1 is compatible with the Arduino UNO R3 connector, and supports the addition of other boards which can be stacked to drive up to three stepper motors with a single STM32 Nucleo board.

Operating voltage 7.5V to 85V
Adjustable output slew rate
Programmable speed profile
Up to 1/128 microstepping
Sensorless stall detection
Integrated voltage regulators
SPI interface
Low quiescent standby currents
Programmable non-dissipative over-current protection
Over-temperature protection

Motor Controllers & Drivers, STMicroelectronics

Specifications
Attribute Value
Power Management Function Stepper Motor Driver
Kit Classification Expansion Board
For Use With STM32 Nucleo Boards
Kit Name X-Nucleo-IHM
Available to back order for despatch 21/04/2020
Price Each
£ 8.27
(exc. VAT)
£ 9.92
(inc. VAT)
Units
Per unit
1 +
£8.27
Related Products
The ADuM4223 is a 4A isolated, half-bridge gate ...
Description:
The ADuM4223 is a 4A isolated, half-bridge gate driver that employ Analog Devices, i Coupler® technology to provide independent and isolated high-side and low-side outputs. It combines high speed CMOS and monolithic transformer technology to provide outstanding performance characteristics superior to current alternatives, such as the combination of pulse transformers ...
The LB1909MC is a low saturation voltage stepping ...
Description:
The LB1909MC is a low saturation voltage stepping motor driver IC. It is optimal for motor drivers in 12V system products. Current consumption 0 in standby mode The compact package (MFP-10S) is adopted. VCC max = 20V, IO max = 0.8ABIP output transistor adoption (Upper and lower total Vo(sat)=0.5V(typical) at ...
The HIP2103_4MBEVAL1Z mother board with the HIP2103DBEVAL1Z and ...
Description:
The HIP2103_4MBEVAL1Z mother board with the HIP2103DBEVAL1Z and HIP2104DBEVAL1Z evaluation daughter cards constitute an evaluation tool for the HIP2103 and HIP2104 half bridge MOSFET drivers.The motherboard platform provides an on-board microcontroller that is used to generate appropriate control inputs to the HIP2103 or HIP2104. DIP switches on the mother board ...
The Si875x evaluation boards are ideal for driving ...
Description:
The Si875x evaluation boards are ideal for driving power switches and evaluate the Si8751 and Si752 isolated MOSFET drivers.Isolation voltage rating up to 2.5 kV RMS, supporting UL1577 and VDE0884 standards. Supports both DC or AC load switching Jumper to evaluate Miller Clamp function Si8751-KIT with digital input (2.25 V ...