Phihong POE Injector

Unavailable
RS will no longer stock this product.
RS Stock No.:
873-0730
Mfr. Part No.:
POE21U-1AF-R
Brand:
Phihong
Find similar products by selecting one or more attributes.
Select all

Brand

Phihong

Efficiency

80%

Length

163.25mm

Width

65mm

Weight

200g

Minimum Temperature

0°C

Maximum Temperature

+40°C

Injector Type

Mid-Span

Power Signal Conversion Type

AC-DC

Supported Ethernet Standards

IEEE802.3af

Mounting Style

Desktop

Number of DC Power Output Ports

1

Number of Ethernet Ports

2

Protection Type

Over Current, Over Voltage, Short Circuit

Response Time

10ms

Standards Met

CE, cULus

Series

POE21U

Product Type

Power Injector

Input AC Connector Type

RJ45

RoHS Status: Not Applicable

COO (Country of Origin):
CN

Phihong Single Port PoE Injector


The Phihong device is midspan, single port, PoE injector. It has an electrical rating of 56VDC and 350mA with full IEEE802.3af compliance and a C14 3 pin inlet. This is equipped with short-circuit protection and overload protection.

Features and Benefits


3-wire input voltage ranging from 100VAC to 240VAC and 90VAC to 264VAC
Efficiency is 80%
Gigabit compatible
Limited power source
Non vented case
Operating temperature ranges between 0°C and 40°C
Output power is 19.6W
RJ45 data input/output connector
Status indication of solid green valid ieee802.3af load detected and connected ’ON’, blinking green: power ’ON’ ready for connection, blinking red/green: invalid load connected and blinking red: fault