Parker Pneumatic Timer 8 bar max
- RS Stock No.:
- 410-460
- Mfr. Part No.:
- PRT-F10
- Brand:
- Parker
Bulk discount available
Subtotal (1 unit)*
£230.35
(exc. VAT)
£276.42
(inc. VAT)
FREE delivery for orders over £60.00
Temporarily out of stock
- 8 unit(s) shipping from 11 June 2026
- Plus 7 unit(s) shipping from 22 October 2026
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units | Per unit |
|---|---|
| 1 - 4 | £230.35 |
| 5 + | £221.13 |
*price indicative
- RS Stock No.:
- 410-460
- Mfr. Part No.:
- PRT-F10
- Brand:
- Parker
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Parker | |
| Product Type | Pneumatic Timer | |
| Hazardous Area Certification | Conforming to certificate LCIE 866115X, EExe ll T4 | |
| Mount Type | DIN Rail | |
| Minimum Operating Pressure | 3bar | |
| Maximum Operating Pressure | 8 bar | |
| Minimum Operating Temperature | -15°C | |
| Maximum Operating Temperature | 60°C | |
| Standards/Approvals | EN 50014 dated March 1977 (NFC 23514 dated May 1982), EN 50019 dated March 1977 (NFC 23519 dated May 1982) | |
| Select all | ||
|---|---|---|
Brand Parker | ||
Product Type Pneumatic Timer | ||
Hazardous Area Certification Conforming to certificate LCIE 866115X, EExe ll T4 | ||
Mount Type DIN Rail | ||
Minimum Operating Pressure 3bar | ||
Maximum Operating Pressure 8 bar | ||
Minimum Operating Temperature -15°C | ||
Maximum Operating Temperature 60°C | ||
Standards/Approvals EN 50014 dated March 1977 (NFC 23514 dated May 1982), EN 50019 dated March 1977 (NFC 23519 dated May 1982) | ||
Timer Module
A pneumatic timer consists of a solenoid coil/core, operating spring, timing disk, filter and diaphragm. The core moves up into the coil when it has been energized and this leads to pressure on the diaphragm. The diaphragm moves into the top chamber which un-traps the air through the timing disk. By altering the needle valve you can adjust the amount of delay.
Very Reliable
Long Life Expectancy
Logic Systems
Logic units are best thought of as miniature valves, whose purpose is to influence the behaviour of larger power valves. They achieve this by producing and receiving output and input signals, using the common air supply. In this way, they are able to monitor and control a whole sequence of operations with great accuracy and repeatability.
Note
All logic units require mounting on a separate 2 or 3 port base, available separately. Logic units have an input (green) and output (red) pressure indicator to show the state of the respective signal. Units are supplied with two captive screws for mounting on all types of base and sealing o-rings are in the bottom of each unit.