Festo Push In 6 mm Pneumatic Regulator -, 9bar max. input, 153496
- RS Stock No.:
- 125-9898
- Mfr. Part No.:
- LRMA-QS-6
- Brand:
- Festo
Unavailable
RS will no longer stock this product.
- RS Stock No.:
- 125-9898
- Mfr. Part No.:
- LRMA-QS-6
- Brand:
- Festo
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Festo | |
| Port Connection | Push In 6 mm | |
| Maximum Input Pressure | 9bar | |
| Maximum Flow Rate | 124L/min | |
| Typical Flow Rate | 36 → 124L/min | |
| Minimum Operating Temperature | 0°C | |
| Maximum Operating Temperature | +60°C | |
| Overall Height | 63mm | |
| Overall Length | 45mm | |
| Overall Width | 15mm | |
| Model Number p | 153496 | |
| Overall Dimensions | 45 x 15 x 63mm | |
| Select all | ||
|---|---|---|
Brand Festo | ||
Port Connection Push In 6 mm | ||
Maximum Input Pressure 9bar | ||
Maximum Flow Rate 124L/min | ||
Typical Flow Rate 36 → 124L/min | ||
Minimum Operating Temperature 0°C | ||
Maximum Operating Temperature +60°C | ||
Overall Height 63mm | ||
Overall Length 45mm | ||
Overall Width 15mm | ||
Model Number p 153496 | ||
Overall Dimensions 45 x 15 x 63mm | ||
- COO (Country of Origin):
- JP
Festo LRMA Series Pressure Regulators
Festo LRMA series pressure regulator maintains a constant output pressure on the secondary side independent of pressure fluctuations on the primary side and air consumption. The primary pressure at the screw-in thread is reduced when air is exhausted from the QS push in connector. The LRMA series features a pressure gauge to give visible feedback from the unit.
Features and Benefits
Visible pressure gauge indicator
With threaded and push in connector
Push in connector can be rotated 360°
With threaded and push in connector
Push in connector can be rotated 360°
Festo LRMA-QS-6 Pressure Regulator
The LRMA-QS-6 from Festo is a pneumatic pressure regulator which has been designed to control the output pressure at a constant rate. The convenient push in fitting system offers complete flexibility for your pneumatic connections.
Features and Benefits
• Pressure regulator with pressure gauge
• Easy to use with QS push in connector at both ends
• For tubing with 0.D. 6 mm
• Constant output pressure
• Can be mounted through mounting holes
• Mounted in any position
• Operating temperature 0 to 60 °C
• Minimal dimensions
• Easy to use with QS push in connector at both ends
• For tubing with 0.D. 6 mm
• Constant output pressure
• Can be mounted through mounting holes
• Mounted in any position
• Operating temperature 0 to 60 °C
• Minimal dimensions