Festo SPAN series pressure sensors for monitoring compressed air and non-corrosive gases. The measuring method is based on a piezoresistive measuring cell for relative pressure measurement. Pressure values are transmitted to the connected control system as a switching signal, as an analogue signal or via IO-Link depending on the sensor variant and selected parameters.

Compact design
IO-Link
Clear 2-line display
Various switching functions
Pressure and vacuum
13 pressure measuring ranges

The Festo SPAN series pressure sensor is designed to monitor pressure of compressed air and non-corrosive gases. It works on 30V supply voltage. The sensor measures the pressure in range of -1bar to 1bar. It has a switchable element function with normally open or normally closed contact. This has a push-in connector of 4mm without thread. It has a clear 2-line display.

• Service temperature ranges between 0°C and 50°C
• Switching electrical output is of NPN or PNP or IO-link type
• Plug connector with L1 design
• Accuracy is ±1.5% FS
• Wall mounting with front panel

• Network and regulator monitoring
• Object detection
• Leak test

• cULus approved
• CE certified
• IP40 rated