Need a way to keep eye on your pneumatic equipment? Trust the task to this Festo pressure sensor. It monitors the flow rate of compressed air, so you quickly know when pneumatic levels rise or fall. As its switching function is freely programmable, you can choose if its contacts are NC or NO. To take the sting out of power faults, the unit is protected against short-circuiting. You can optionally use a PIN code, preventing unauthorised changes to your pressure settings.

• Illuminated LCD for easy reading in dim light conditions
• IP65 rating indicates it's dust-tight and protected against low-pressure water jets from any direction
• Wide operating pressure range between 0 and 10 bar for versatility
• Optional mounting positions to suit the needs of your setup

• Automated assembly lines
• Hospitals
• Pharmaceutical manufacturing
• Mechatronics

The component displays measuring units including MPa, bar, mmHg and psi, so you can use it for monitoring and sensing the pressure of most non-corrosive gases.

The device has an operating temperature of 0°C to +50°C, so is safe for use in challenging settings.