SKF PF 47 Locating Ring -, 47 mm ID

This locating ring provides accurate axial positioning for assemblies where a round bore Interface is required. Designed for mechanical and automation environments, it aligns components using a circular inner aperture and an open-ended configuration to facilitate insertion and removal. The component is constructed from steel and conforms to recognised JIS and ISO standards, making it suitable for integration into machinery and equipment that require standardised locating elements.

• 3.3 kN static load rating for predictable axial restraint
• Round bore 47mm for consistent shaft alignment
• Open end form enables straightforward component access
• 3-bolt attachment gives secure, repeatable mounting

• Suitable for locating housings in automated assembly lines
• Ideal for aligning motor shafts in electrical drives
• Used with control panels in electronics manufacturing
• Can be used for fixture locating in mechanical fabrication

It uses three fasteners through holes sized for 8.7 mm bolts positioned on a 71.4mm centre-to-centre pattern to ensure stable attachment.

The steel construction is rated to withstand a static axial load of 3.3 kN, providing predictable resistance to displacement under stationary loads.

The part has a nominal height of 90mm with a matching overall length of 90mm and a depth of 16mm that influence clearance and stack-up in assemblies.