The MVSTBR and MVSTBW series of PCB connectors are from the series 'CLASSIC COMBICON' and feature and 5.08mm pitch and a 0.2mm² to 2.5mm² screw connection terminal. Screw connections provide a strong connection and an easy install and also have a low-temperature rise thanks to the maximum contact force. Rated at 12 A, these PCB connectors will be suitable for most applications and they also have a well-known connection principle that allows you to incorporate these into designs to be used worldwide.

Housings are made from a strong polyamide material with Cu (Copper) alloy contacts.

The MVSTBR and MVSTBW series can be used in the below applications, but are not limited to:

• Control wiring


• Instrumentation


• Control and measurement


• Industrial electronics

This pluggable terminal block is designed for dependable electrical connections across various applications thanks to its robust and user-friendly design. It is particularly relevant in automation and electronics, allowing simplified wiring solutions while maintaining performance. Its structure supports compatibility with a wide range of conductor types and sizes, making it suitable for diverse industrial needs.

• 12 contacts enable simultaneous electrical connections
• Screw termination method firmly secures connections
• 5.08mm pitch facilitates compact connection arrangements
• High voltage rating of 630V enables versatile applications
• Nylon construction promotes durability and wear resistance
• Tin contact plating ensures effective conductivity

• Connecting PCB terminals in control systems
• Power distribution in automation equipment
• Managing wiring efficiently in electrical panels
• Providing secure connections in mechanical assemblies

A conductor size between 0.2 and 2.5mm² is recommended for both solid and flexible conductors.

It operates efficiently within a temperature range of -40 to 100°C, depending on conditions.

Yes, you can connect two conductors of the same cross-section in each position.

A slotted screwdriver with a tightening torque between 0.5 and 0.6Nm is ideal for secure connections.

The recommended crimping tool for ferrules is CRIMPFOX 6 for optimal performance.