Want a single hub to house those all-important connections on your PCB? Put your wires together in one place with this pluggable terminal block from Phoenix Contact. It mounts directly onto a board and takes in 10 connecting cables to streamline your setup.
Thanks to screw connection and tension sleeves, installation is a walk in the park. Simply strip and expose 7mm of wire and crimp it into a ferrule. Use a screwdriver to secure the connector in the block, and you're good to go. The copper contacts will then zip signals along at rapid-fire speeds. There's no need to worry about corrosion in damp or humid settings as each contact is coated in protective tin.

• Small size of 18.3 (L) x 50.8 (W) x 15mm (H) suits systems where space is tight
• Wires can safely be inserted and withdrawn up to 25 times for repeated use
• Requires 6N to remove wires, making accidental loosening unlikely
• Safe to use in challenging locations, thanks to an operating temperature range between -40°C and +70°C