Eaton MFD-AC-CP8, MFD-CP10 PLC I/O Module 12 Inputs, 4 (Relay) Outputs 24 V dc, 90 x 88.1 x 44 mm

  • RS Stock No. 478-9886
  • Mfr. Part No. MFD-R16
  • Brand Eaton
Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): DE
Product Details

I/O Modules

Easy-MFD I/O modules clip to the rear of the CPU and may be selected as required for the application. The analogue I/O voltage range is 0 to +10Vdc

Note

To use one of these modules you will also need a Display Unit (typical stock no. 478-9836) and a PSU-CPU-logic Controller Module (typical stock no. 478-9858). If further I/O is required, mounting kit stock no. 479-6430 and digital expansion modules from the Easy range may be used.

Eaton MFD-Titan

The MFD-Titan multi-function display is available as modular components which can be assembled to suit your requirements.,One option is to use a display unit mounted on the front of a panel, coupled directly to a rear of panel PSU-CPU logic controller module (the data and supply lines are coupled through a connector which is integrated within one of the two 22.5mm diameter mounting bosses). With the addition of one of a choice of four clip-on digital and analogue I/O modules, you end up with a panel mounted controller which is equivalent in power and features to an easy800, combined with a flexible HMI.If you need additional I/O, a mounting kit is available which enables one of the digital expansion modules from the easy range to be used as well.,Alternatively, to add a flexible HMI to an easy controller, the display unit can be coupled through the panel to a display repeater module. This in turn is connected to an easy controller using the supplied five metre serial lead, which can be shortened (at the communication module end) if required. Two display repeater modules are available, one suits the easy500 and 700, the other suits the easy800.

Specifications
Attribute Value
Manufacturer Series MFD-AC-CP8, MFD-CP10
Number of Inputs 12
Number of Outputs 4 (Relay)
Input Type Digital
Output Type Relay
For Use With MFD-AC-CP8, MFD-CP10
Voltage Category 24 V dc
Module Type I/O Module
Length 90mm
Width 88.1mm
Depth 44mm
Dimensions 90 x 88.1 x 44 mm
5 In stock for FREE next working day delivery
Price Each
£ 100.76
(exc. VAT)
£ 120.91
(inc. VAT)
Units
Per unit
1 +
£100.76
Related Products
Equipped with astounding memory and performances, this featherweight ...
Description:
Equipped with astounding memory and performances, this featherweight version will inspire your applications with new momentum. Designed to operate in total synergy with other Schneider Electric devices, Modicon M340 a building block towards your total solution. Data rate: 20kb/s to 1Mb/s (bus length dependent)Internal RAM capacity: 4Mb (3584kb of program ...
SCALANCE access points with two built-in radio interfacesFor ...
Description:
SCALANCE access points with two built-in radio interfacesFor designing Industrial Wireless LAN (IWLAN) radio networksReliable communicationEncryption protects against unauthorized accessSuitable for mounting outdoors.
These look similar to FX2N Base Units and ...
Description:
These look similar to FX2N Base Units and are available in 32 and 48 I/O formats. They attach to the right hand end of the Base Unit or Digital Expansion Blocks, and require an external supply of 100 – 240Vac. All inputs are opto-isolated, 24Vdc sink or source selectable to ...
Digital input and outputs for the ET 200SConnect ...
Description:
Digital input and outputs for the ET 200SConnect to terminal modules TM-E with automatic encryptionHigh-spec version for increased system availability, additional functionality and extensive diagnosticsModule exchange during operation subject to voltage (hot swapping).