The Watchdog 280° MasterLINE is an electronic movement detector for detecting thermal motion. Supplied complete with an IR remote control.
Electronic movement detector for detecting thermal motion Remote control possible via IR remote control 6841 (included in delivery) Remote configurable via IR service remote control (RS 777-7738) With display for detection and operation mode With ground and rear-field detection With high-quality lens for optimum detection Detection sensitivity adjustable via IR remote control Surveillance density: 110 sectors with 440 switching segments With integrated dismantling protection All functions controlled by microprocessor Continuous light (4 hours) and presence simulation can be activated via remote control With automatic range stabilization With automatic interference suppression With automatic dazzle-proofing With brightness-independent test mode for evaluating the detection zone Individual adjustment of detection range via enclosed protective foil which can be cut to size Additional possibility for switch-on via normally open push-button switch Switch-off delay: 10 sec to 30 min or short-time pulse 1 sec adjustable Rated voltage: 230 V∼, +10% / -10% Rated frequency: 50 Hz - 60 Hz Power dissipation: 1 W Outputs: 1 Normally open contact, potential-bound Suitable for: ohmic, capacitive and inductive loads Rated current: 16 AX, cos φ0.6 Rated power: 3680 W/VA Protection class (Device): IP 55 Temperature range (Device): -25 °C - 55 °C Detection range: frontal: 16 m lateral: 16 m Brightness limit value: 0.5 Lux - 300 Lux - , Daytime operation Detection angle: 280° Dimensions: (L x W x D): 115 mm x 125 mm x 141 mm Mounting height: 2.5 m
Note
In combination with a relay/contactor, an RC suppressor has to be used (ABB Part No 6899)
ABB Busch-Watchdog 220/280 MasterLINE Movement Detectors