Microchip KSZ9021RN, 1000BASE-T, 100BASE-TX, 10BASE-T, IEEE 802.3 Ethernet Transceiver, 1.2 V, 48-Pin QFN

  • RS Stock No. 178-5249
  • Mfr. Part No. KSZ9021RN
  • Brand Microchip
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Ethernet Transceivers, Micrel Inc

Micrel offers energy efficient, highly integrated, compact and cost effective solutions in Fast and Gigabit Ethernet Physical Layer Transceivers.

Ethernet Communications - Microchip

Specifications
Attribute Value
Standard Supported IEEE 802.3, 10BASE-T, 100BASE-TX, 1000BASE-T
Typical Data Rate 10 Mbps, 100 Mbps, 1000 Mbps
Typical Operating Supply Voltage 1.2 V
Mounting Type Surface Mount
Package Type QFN
Pin Count 48
Length 7mm
Maximum Operating Temperature +70 °C
Minimum Operating Temperature 0 °C
Width 7mm
1560 In stock for FREE next working day delivery
Price Each (In a Tray of 260)
£ 2.96
(exc. VAT)
£ 3.55
(inc. VAT)
Units
Per unit
Per Tray*
260 +
£2.96
£769.60
*price indicative
Related Products
The LAN9252 device from Microchip is a 2/3 ...
Description:
The LAN9252 device from Microchip is a 2/3 port Ether CAT® slave controller with dual integrated Ethernet PHYs, each of which contain a full-duplex 100BASE-TX transceiver. The LAN9252 supports HP Auto MDI-X that allows the use of direct connect or cross-over LAN cables. 100BASE-FX is supported via an external fiber ...
Detects the Following Faults:Open-Circuit Condition Short-Circuit Condition Low ...
Description:
Detects the Following Faults:Open-Circuit Condition Short-Circuit Condition Low Differential Voltage Signal Common-Mode Range Violation ESD Protection±15kV—Human Body Model±15kV Air-Gap Discharge Method±8kV Contact Discharge Method Single +3V to +5.5V Operation-10V to +13.2V Extended Common-Mode Range Capacitor-Programmable Delay of Fault Indication Allows Error-Free Operation at Slow Data Rates Independent and Universal Fault ...
The KSZ8081 is a single-supply 10Base-T/100Base-TX Ethernet physical-layer ...
Description:
The KSZ8081 is a single-supply 10Base-T/100Base-TX Ethernet physical-layer transceiver for transmission and reception of data over standard CAT-5 unshielded twisted pair (UTP) cable. The KSZ8081 is a highly-integrated PHY solution. Ethernet transceiver MII interface support (KSZ8081MNX)RMII v1.2 Interface support with a 50MHz reference clock output to MAC, and an option ...
The KSZ9031 reduces board cost and simplifies board ...
Description:
The KSZ9031 reduces board cost and simplifies board layout by using on-chip termination resistors for the four differential pairs and by integrating an LDO controller to drive a low-cost MOSFET to supply the 1.2V core. Single-chip 10/100/1000Mbps Ethernet transceiver KSZ9031Mxx feature GMII/MII standard interface with 3.3V/2.5V/1.8V tolerant I/Os KSZ9031Rxx feature ...