Fluke 125B is a 40 MHz model in the Fluke industrial ScopeMeter 120B Series. Each 120B model is an easy-to-use integrated test tool comprising oscilloscope, multimeter and high-speed recorder. It includes innovative functions designed to help troubleshoot faster and get the answers needed to keep systems up and running. Operators can display waveforms with Connect-and-View trigger and setup technology. They can view related numerical measurements using Fluke IntellaSet technology. These functions are free of the need to make manual measurement adjustments. With Recorder Event Detect capabilities, elusive intermittent events are captured and logged for easy viewing and analysis.
Dual-input digital oscilloscope and multimeter
20 MHz oscilloscope bandwidth
5000-count True RMS digital multimeter
Connect-and-View trigger simplicity for hands-off operation
IntellaSet technology automatically and intelligently adjusts numerical readout based on the measured signal
Dual-input waveform and meter reading recorder for trending data over extended periods
Recorder Event Detect captures elusive intermittent signals on repetitive waveforms up to 4 kHz
Shielded test leads for oscilloscope, resistance and continuity measurements
Resistance, continuity, diode and capacitance meter measurements
Power measurements (W, VA, VAR, PF, DPF, Hz)
Voltage, current and power harmonics
Check Industrial networks with BusHealth physical layer tests against defined reference levels
Save or recall data and instrument setups
Store instrument setups defined by a test sequence for routine maintenance or most-often-used test procedures
External optically isolated USB interface to transfer, archive and analyse scope or meter data
FlukeView ScopeMeter software for Windows
Rugged design (to withstand 3 g vibration, 30 g shock) and rated IP51 according to EN/IEC60529
Highest safety rating in the industry, safety rated for CAT IV 600 V
Rechargeable battery
Dimensions 259 x 132 x 55 mm
Weight 1.4 kg
Fluke 120B/S versions also include soft carry case, FlukeView™ for Windows® software, magnetic hanger and screen protector
The 40 MHz Fluke 125B includes scope cursor measurements, power and harmonics measurements and bus health tester.
IEC 61010-1: Pollution Degree 2, IEC 61010-2-033: CAT IV 600 V/CAT III 750 V
Li-Ion battery pack, charger/power adapter, 2 shielded test leads with ground leads, black test lead, red and blue hook clips, banana to BNC adapter, 10:1 voltage probe, i400S AC current clamp
The Fluke 125 series, 2-channel, 40MHz is a UK plug type compact scopemeter and an integrated test tool, with an oscilloscope, multimeter and high-speed recorder in one easy-to-use instrument. This scopemeter also integrates with Fluke connect mobile app and Fluke View for scopemeter software to enable further collaboration, data analysis and archiving of critical test information.
Note:
The 40 MHz Fluke 125B includes scope cursor measurements, power and harmonics measurements and bus health tester.
Supplied with:
Li-ion battery pack, charger/power adapter, shielded test leads (2) with ground leads, black test lead, red and blue hook clips, banana to BNC adapter, carry case,
Fluke View for Windows software, magnetic hanger, screen protector.
Rise time is less than 8.75ns
Dual-input digital oscilloscope and multimeter
Two 5,000 counts true-RMS digital multimeter
Automatic measurements
Dual-input waveform and meter reading recorder for trending data over extended periods
Recorder event detect captures elusive intermittent signals on repetitive waveforms up to 4 kHz
Connect-and-View trigger simplicity for hands-off operation
Shielded test leads for oscilloscope, voltage, resistance and continuity measurements
Measures voltage, current and power harmonics
Up to 7 hours of rechargeable battery operation
External optically isolated USB interface to transfer, archive and analyse scope or meter data
Rugged compact case
Fluke 125B gives bus health and power measurements
Industrial equipments
Electro-mechanical troubleshooting and maintenance
IP51 rated
IEC 61010-1 approved
Pollution Degree 2, IEC 61010-2-033
CAT III 750V
CAT IV 600V
The small, lightweight hand held digital oscilloscopes are ideal for use by technicians working in service, maintenance and installation applications. Features include:
Intuitive menu driven operation
Reliable automatic (and manual) triggering including motor drives and video
Connect and View™ hands off operation provides stable, reliable and repeatable display of signals without touching a button
Measurements include: V dc, VAC True RMS, Hz, duty cycle, pulse width, dBV, dBm, phase A to B, crest factor, Ohms, continuity, frequency, diode and capacitance
40 ns glitch capture
Dual channel Trendplot™ displays graphs of max. and min. readings with time and date stamp
High brightness, high contrast LCD display
Single shielded test lead type for each channel is used for all measurement including DSO and digital multimeter functions
Rugged and splash proof design with integral holster for reliable operation.
Safety designed to meet IEC 1010-1 Cat III 600 V for industrial power systems
Attribute | Value |
---|---|
Number of Channels | 2 |
Bandwidth | 40MHz |
Oscilloscope Type | Handheld |
Series | 125 |
Calibrated | RSCAL |
Power Source | Battery |
Minimum Vertical Sensitivity | 5mV |
Maximum Vertical Sensitivity | 200V/div |
Minimum Time Base | 10ns |
Screen Size | 5.7in |
Sample Rate Random | 400 K samples/s |
Battery Type | NiMH |
Safety Category Voltage | 600 Vrms, 750 Vrms |
Rise Time | <8.75ns |
Safety Category | CAT III 750 Vrms, CAT IV 600 Vrms |
Plug Type | UK |
Model Number p | 125B |
Safety Category Level | CAT III, CAT IV |