Tektronix DPO2024B, DPO2024B + DPOEMBD Mixed Signal Oscilloscope, 200MHz, 4 Analogue. Ch.
- RS Stock No.:
- 146-6107
- Mfr. Part No.:
- DPO2024B + DPOEMBD
- Brand:
- Tektronix
Alternative
This product is not currently available. Here is our alternative recommendation.
Each
£1,976.00
(exc. VAT)
£2,371.20
(inc. VAT)
- RS Stock No.:
- 146-6107
- Mfr. Part No.:
- DPO2024B + DPOEMBD
- Brand:
- Tektronix
Select all | Attribute | Value |
|---|---|---|
| Brand | Tektronix | |
| Bandwidth | 200MHz | |
| Number of Analogue Channels | 4 | |
| Series | DPO2000B | |
| Interface | CAN, IIC, LIN, RS232, RS422, RS485, SPI, UART, USB | |
| Power Source | Mains | |
| Display Type | TFT | |
| Minimum Vertical Sensitivity | 2mV/div | |
| Maximum Vertical Sensitivity | 5V/div | |
| Minimum Time Base | 2ns/div | |
| Screen Size | 180mm | |
| Sample Rate Random | 1 G samples/s | |
| Height | 180mm | |
| Length | 377mm | |
| Input Capacitance | 8 pF | |
| Weight | 3.6kg | |
| Maximum Time Base | 100s/div | |
| Record Length | 1M points/ch | |
| Vertical Resolution | 8 bit | |
| Input Impedance | 1 MΩ | |
| Dimensions | 377 x 134 x 180mm | |
| Safety Category Level | CAT II | |
| Safety Category | CAT II 300 Vrms | |
| Rise Time | 2.1ns | |
| Select all | ||
|---|---|---|
Brand Tektronix | ||
Bandwidth 200MHz | ||
Number of Analogue Channels 4 | ||
Series DPO2000B | ||
Interface CAN, IIC, LIN, RS232, RS422, RS485, SPI, UART, USB | ||
Power Source Mains | ||
Display Type TFT | ||
Minimum Vertical Sensitivity 2mV/div | ||
Maximum Vertical Sensitivity 5V/div | ||
Minimum Time Base 2ns/div | ||
Screen Size 180mm | ||
Sample Rate Random 1 G samples/s | ||
Height 180mm | ||
Length 377mm | ||
Input Capacitance 8 pF | ||
Weight 3.6kg | ||
Maximum Time Base 100s/div | ||
Record Length 1M points/ch | ||
Vertical Resolution 8 bit | ||
Input Impedance 1 MΩ | ||
Dimensions 377 x 134 x 180mm | ||
Safety Category Level CAT II | ||
Safety Category CAT II 300 Vrms | ||
Rise Time 2.1ns | ||
- COO (Country of Origin):
- CN
Tektronix Mixed Signal Oscilloscopes DPO2000B Series plus DPO2EMBD software
Tektronix DPO2EMBD Oscilloscope Software
The DPO2EMBD Embedded Serial Triggering and Analysis Module adds triggering on packet level information in serial buses used in embedded designs (I2C and SPI), as well as analytical tools to help you efficiently analyse your serial bus. These include bus views, packet decoding, search tools, and event tables with timestamp information.
Suitable for use with DPO/MSO2000 series oscilloscopes.
Features and Benefits
• 2 and 4 analogue channel models
• 1 GS/s sample rate on all channels
• 1 mega-point record length on all channels
• 5000 wfm/s maximum waveform capture rate
• Suite of advanced triggers
• Wave Inspector® controls provide easy navigation and automated search of waveform data
• FilterVu™ variable low-pass filter allows for removal of unwanted signal noise while still capturing high-frequency events
• 29 automated measurements, and FFT analysis for simplified waveform analysis
• TekVPI® probe interface supports active, differential, and current probes for automatic scaling and units
• 7" (180 mm) wide-screen TFT-LCD colour display
• Small footprint and lightweight, only 5.3" (134 mm) deep and 7 lb 14 oz (3.6 kg)
• Automated serial triggering, decode, and search options for I2C, SPI, CAN, LIN, and RS-232/422/485/UART
Connectivity
• USB 2.0 device port on rear panel for easy connection to a PC or direct printing to a PictBridge®-compatible printer
• Optional 10/100 Ethernet port for network connection and video-out port to export the oscilloscope display to a monitor or projector


