RS PRO Oscilloscope Probe, Probe Type: Passive 350MHz 1:1 and 10:1 Switchable

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): TW
Product Details

RS PRO Passive Oscilloscope Probe

Introducing the RS-TP 6350I passive oscilloscope probe from our own trusted and reliable brand RS PRO, an ergonomically designed passive type probe suitable for use with RS PRO oscilloscopes as well as all major brands. This probe offers a switchable attenuation (1:1 / 10:1) featuring bandwidths of 10 MHz and 350 MHz, allowing you to work with high and low frequencies. The RS-TP 6350I is a lightweight passive probe that doesn't require a battery or power supply in order to work, making it ideal for working on the go. This RS PRO passive oscilloscope probe also comes with a complete accessory kit, ensuring you have everything you need to get the job done.

Features and benefits

• Can be used with RS PRO oscilloscopes as well as major brands
• Lightweight yet durable design allowing you to work on the go in a range of environments
• Includes a full accessory kit
• Switchable attenuation offering both 1:1 and 10:1
• Bandwidth: 10 MHz (1:1), 350 MHz (10:1)
• 5 mm diameter
• BNC type connector
• Safety category level: CAT II 55Vrms (1:1), CAT II 400Vrms (10:1)
• Compensation range: 10-30pF
• Rise Time <1 ns (1:1), <35 ns (10:1)
• Input Impedance: 1MOhm / 68pF (1:1), 10MOhm / 13pF (10:1)
• No battery or power supply required

Contents

• RS-TP 6350I probe
• Protective caps (3 pieces)
• BNC adapter
• Spring hook
• Spare probe tip
• Coding rings (8 pieces)
• Grounding lead terminated with insulated crocodile clip
• Ground spring
• Trimmer tool

Applications

An oscilloscope probe is an essential device for use with an oscilloscope when carrying out a range of tests and measurements of electrical devices. The two main types of oscilloscope probes are active and passive, both with varying bandwidths and are commonly used by electrical engineers.

What is oscilloscope probe bandwidth?

The bandwidth of an oscilloscope specifies the usable frequency range of the oscilloscope. The signal processing circuitry of an oscilloscope acts like a low pass filter, limiting the frequency behaviour of the device. Therefore, for a proper analysis, the oscilloscope bandwidth must be considerably higher than the frequency of the signal under test.

Is this oscilloscope probe passive or active?

The RS-TP 6350I oscilloscope probe is a passive type probe that is ideal for general purpose troubleshooting and probing. As it is a passive probe it features no active parts meaning it does not need a power supply or battery to be operated.

Note:

All the products in this range are supplied for use with instruments with a permanent earth connection.

Specifications
Attribute Value
Probe Type Passive
Attenuation 1:1 and 10:1 Switchable
Bandwidth 350MHz
Connector Type BNC
Number of Probes 1
Safety Category Level CAT II
Safety Category Voltage 400 Vrms
Series RS-TP
Safety Category CAT II 400Vrms
Rise Time <35ns
9 in stock for FREE next working day delivery
1 available from Europe for delivery within 1 working day(s)
Price Each
£ 39.85
(exc. VAT)
£ 47.82
(inc. VAT)
Units
Per unit
1 +
£39.85
Related Products
The PicoConnect 442 probe is a 25:1 attenuating ...
Description:
The PicoConnect 442 probe is a 25:1 attenuating probe that enables the PicoScope 4444 differential oscilloscope to measure large-amplitude voltages up to ±1000 V, or voltages with a large common-mode offset. Such voltages are found in electrical power converters, inverters, motor speed controls, switch mode power supplies and many other ...
A range of high performance miniature passive probes ...
Description:
A range of high performance miniature passive probes with BNC connector or 4 mm plugs to suit several instrumants. All probes are equipped with spring loaded needle sharp tips. Two sizes of spring tip are available along with a solid unsprung tip. Basic probe accessories are provided with each probe, ...
Compact design with a 2.5mm probe tip diameter ...
Description:
Compact design with a 2.5mm probe tip diameter provides better visibility to the circuit under test than conventional 5mm or 3.5mm probe tips. This makes it easier to probe today’s fine pitched space ICs and components. The replaceable probe tip is also spring loaded, keeping it from slipping off the ...
Differential active probes are like two probes in ...
Description:
Differential active probes are like two probes in one. Instead of measuring a test point in relation to a ground point (like single-ended active probes) differential probes measure the difference in voltage of a test point in relation to another test point. High bandwidth, excellent common-mode rejection ratio (CMRR) and ...