onsemi, FOD8482 Optocoupler, Surface Mount, 6-Pin
- RS Stock No.:
- 195-8851
- Mfr. Part No.:
- FOD8482
- Brand:
- onsemi
Subtotal (1 tube of 100 units)*
£91.10
(exc. VAT)
£109.30
(inc. VAT)
FREE delivery for orders over £50.00
In Stock
- 800 unit(s) ready to ship
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units | Per unit | Per Tube* |
|---|---|---|
| 100 + | £0.911 | £91.10 |
*price indicative
- RS Stock No.:
- 195-8851
- Mfr. Part No.:
- FOD8482
- Brand:
- onsemi
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | onsemi | |
| Mounting Type | Surface Mount | |
| Maximum Forward Voltage | 0.8V | |
| Number of Pins | 6 | |
| Isolation Voltage | 5000 V | |
| Series | FOD | |
Select all | ||
|---|---|---|
Brand onsemi | ||
Mounting Type Surface Mount | ||
Maximum Forward Voltage 0.8V | ||
Number of Pins 6 | ||
Isolation Voltage 5000 V | ||
Series FOD | ||
The FOD8480 and FOD8482 are low power optocouplers, which support isolated interface to Intelligent Power Module (IPM) communicating digital control signals from the controller to the IPM, without conducting ground loops or hazardous voltages.
The FOD848x Series, packaged in a stretched body 6−pin small outline plastic package, consists of an aluminium gallium arsenide (AlGaAs) light emitting diode and an integrated high gain photo detector. The detector has a detector threshold with hysteresis. The hysteresis provides differential mode noise immunity and eliminates the potential for output signal chatter. Its non−inverting output is designed as totem pole, which does not require any pull−up resistor.
The FOD8482 has a lower threshold input current, IFLH, at 3.0 mA maximum.
The FOD848x Series, packaged in a stretched body 6−pin small outline plastic package, consists of an aluminium gallium arsenide (AlGaAs) light emitting diode and an integrated high gain photo detector. The detector has a detector threshold with hysteresis. The hysteresis provides differential mode noise immunity and eliminates the potential for output signal chatter. Its non−inverting output is designed as totem pole, which does not require any pull−up resistor.
The FOD8482 has a lower threshold input current, IFLH, at 3.0 mA maximum.