Renesas, PS9513L3-AX Photodiode Output Optocoupler, Surface Mount, 8-Pin DIP

View all Optocouplers
Currently unavailable
We don’t know if this item will be back in stock, it is being discontinued by the manufacturer.
RS Stock No.:
186-4481
Mfr. Part No.:
PS9513L3-AX
Brand:
Renesas Electronics
Find similar products by selecting one or more attributes.
Select all

Brand

Renesas Electronics

Mounting Type

Surface Mount

Output Device

Photodiode

Maximum Forward Voltage

2.1V

Number of Channels

1

Number of Pins

8

Package Type

DIP

Typical Rise Time

520ns

Maximum Input Current

10 mA

Isolation Voltage

5 kVrms

Minimum Current Transfer Ratio

44%

Typical Fall Time

250ns

COO (Country of Origin):
JP
The PS9513, PS9513L1, PS9513L2 and PS9513L3 are optically coupled isolators containing an AlGaAs LED on the input side and a photo diode and a signal processing circuit on the output side on one chip. The PS9513 is designed specifically for high common mode transient immunity (CMR) and low pulse width distortion with operating temperature. It is suitable for IPM drive. The PS9513L1 is lead bending type for long creepage distance. The PS9513L2 is lead bending type for long creepage distance (Gull-wing) for surface mount. The PS9513L3 is lead bending type (Gull-wing) for surface mounting.

Long creepage distance (8 mm MIN. : PS9513L1, PS9513L2)
High common mode transient immunity (CMH, CML = ±15 kV/μs MIN)
High-speed response (tPHL = 500 ns MAX., tPLH = 750 ns MAX.)
Propagation Delay Difference (tPLH – tPHL = 270 ns TYP.)
Pulse width distortion (|tPHL – tPLH| = 270 ns TYP.)
Open collector output
Pb-Free product
APPLICATIONS
IPM Driver
General purpose inverter