4D Systems 1.7in Passive matrix OLED Display 160 x 128 COM Interface

  • RS Stock No. 171-1828
  • Mfr. Part No. UOLED-160G2-AR
  • Brand 4D Systems
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): PH
Product Details

4D Systems PMOLED Display Modules with GOLDELOX Processor for Use with Arduino

The range of passive matrix OLED display modules for Arduino available from 4D Systems provide everything needed by a user to easily interface between an Arduino (using its serial port + one GPIO pin) and the OLED module, eliminating wiring headaches. The user can then quickly begin programming the 4D Systems display module through the Arduino. This display is a secondary display and does not replace the monitor or TV used to program the Arduino itself.

Powered from the Arduino the display module GOLDELOX processor can be programmed and configured using 4D Systems’ Workshop4 IDE software (see datasheet for download instruction). The OLED module is set up to receive a wide range of serial commands from the Arduino, for example, to display shapes, text, images, to play sounds and log data to the microSD card.


GOLDELOX processor
Built-in extensive 4DGL graphics and system library functions
Flash memory for user code
Audio amplifier and loudspeaker
microSD card socket
2 x GPIO pins
I2C and UART serial communications
Powered from Arduino

Kit Contents

OLED Display Module
4D Arduino adapter shield
Female to female 150mm 5-way jumper cable
5 way male to male adapter
Quick start user guide


Arduino MCU module is not included.

4D Systems Passive Matrix OLED Displays

Attribute Value
Diagonal Display Size 1.7in
Viewing Area Dimensions 33.6 x 27.0mm
Matrix Type Passive
Resolution 160 x 128
Number of Colours 65,536
Contrast Ratio 5000:1
Interface Ports COM
Dimensions 52.0 x 36.0 x 15.5mm
Depth 15.5mm
Height 36mm
Maximum Operating Temperature +75°C
Power Dissipation 1 W
Minimum Operating Temperature -35°C
Viewing Area Width 33.6mm
Forward Voltage 5 V
Width 52mm
Operating Temperature Range -35 °C → +75°C
Forward Current 50mA
Viewing Area Height 27mm
Available to back order for despatch 04/02/2020
Price Each (In a Box of 25)
£ 41.543
(exc. VAT)
£ 49.852
(inc. VAT)
Per unit
Per Box*
25 +
*price indicative
Related Products
HV5812 is a 20-channel, serial input, vacuum-fluorescent display ...
HV5812 is a 20-channel, serial input, vacuum-fluorescent display driver. It combines a 20-bit CMOS shift register, data latches, and control circuitry with high voltage MOSFET outputs. The HV5812 is primarily designed for vacuum-fluorescent displays. The CMOS shift register and latches allow direct interfacing with microprocessor based systems. Data input rates ...
The 4D Systems MOTG (Modules on the Go) ...
The 4D Systems MOTG (Modules on the Go) product family provides an innovative plug and play solution for adding key functionalities to 4D Systems gen4 LCD Display Modules.Utilising a modular concept, the MOTG range provides a simple method for swift hardware expansion, allowing rapid design and maintenance of applications requiring ...
These full colour (RGB) displays are available in ...
These full colour (RGB) displays are available in various resolutions. Orientation includes landscape or portrait versions. Operating temperature ranges include standard (0 to +50 deg C) and wide (-20 to +70 deg C). To meet the demands of customer applications these displays are available with viewing angles of 6 and ...
The VM800B development modules provide a hi-quality display ...
The VM800B development modules provide a hi-quality display system in a bezel with a fitted LCD display and FT800 component board in a rugged, plastic enclosure. Offered in black or pearl colour, this display sub-system can shorten development time at low cost. On-board FT800 Embedded Video Engine (EVE)Available with 3.5in, ...