The ST2000PEXPSE Dual Port PoE NIC provides two 10/100/1000 Mbps PoE RJ45 ports that can provide up to 25.5W of power each, combining a network data connection and power on a single cable, for less clutter and convenient installations in remote locations.
This full/low profile Gigabit server adapter supports the IEEE 802.3at (Type 1 and 2) standard for a Power Sourcing Equipment (PSE) device, and can deliver 48V DC power to compliant Powered Devices (PD). This eliminates the need for a separate power source and cable for remote networked devices such as IP cameras, IP phones and wireless access points.
Suitable for any PCI Express-enabled client, server or workstation, this versatile PoE network adapter supports features such as Jumbo Frames, VLAN tagging and Wake on LAN (WOL).
The ST2000PEXPSE PoE NIC is backed by a StarTech.com 2-year warranty and free lifetime technical support.

• Dual 10/100/1000 Mbps PoE RJ45 ports
• Supports IEEE 802.3at (Type 1, 2) Power over Ethernet standard
• Power Sourcing Equipment (PSE) design, provides data and up to 25.5W of power on each port
• Built-in SATA and LP4 Molex power connector
• Unique surge protection design helps prevent system damage in the event of lightning strikes
• Jumbo Frame support
• On-chip 48 KB Big Transmit/Receive Buffer Support
• Fully Compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, and supports IEEE 802.1Q VLAN tagging, IEEE 802.1P Layer 2 Priority Encoding and IEEE 802.3x Full Duplex Flow Control
• Crossover Detection &

• Provide power to PoE powered devices, where they have no access to a power source
• Add 2 Ethernet ports to a workstation or server computer from a single PCIe slot
• Connect to 2 separate networks simultaneously
• Install dual networking capabilities into a small form factor or other space-constrained computer system
• Connecting Power over Ethernet-enabled IP cameras, IP phones or Wireless Access Points

• PCI Express Network Card
• Low Profile Bracket
• Driver CD
• Instruction Manual

PCI Express Network Card