MeggerMultimeter Test Lead 1003-132 Test Lead Kit No, CAT IV 300 V

  • RS Stock No. 537-7282
  • Mfr. Part No. 1003-132
  • Brand Megger
Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

LTW 300 Series

Earth loop impedance testers to verify the loop impedance of a live electrical circuit without the need to disconnect the electrical supply. The LTW300 series instruments offer a safe and easy 2 wire loop testing solution that does not trip 30mA RCDs and can be used on a wide range of voltages.

Backlit display
0.01Ω resolution
No-trip loop test on circuits with RCDs of ≥30 mA
3 phase circuits with RCD protection can be tested
Tests radial circuits where the circuit does not return to the origin, even where only a phase and neutral contacts are available.
10 second non trip loop test time with Auto test extension up to a further 10 seconds if noise is detected, to improve the accuracy of the test
High current loop testing for supplies that do not have an RCD fitted
AUTO START will start the loop test running as soon as the test leads are connected; no need to press the test button means much safer testing
PFC Display up to 20kA
Voltage and frequency measurement
110Vac systems including 110V centre tap to earth (55V phase to earth) can be tested on the secondary winding.
IP54 Weatherproof case
Optional 10A fused 2 wired test leads and crocodile clip set
Complies with IEC61010-1 300V CATIV safety standard and meets EN61557

Note

RS is an authorised Megger distributor. Purchased though RS this product is eligible for the Megger extended 3 Year warranty

Supplied with

Test lead set with crocodile clips, mains socket test lead, 8 AA alkaline batteries, hard carry case and instructions.

Specifications
Attribute Value
Lead Type Test Lead Kit
Connector Type Crocodile Clip
Fused No
Current Rating 10A
Safety Category Voltage 300V
Safety Category CAT IV 300 V
Safety Category Level CAT IV
8 In stock for FREE next working day delivery
Price Each
£ 48.00
(exc. VAT)
£ 57.60
(inc. VAT)
Units
Per unit
1 +
£48.00
Related Products
The Fluke v3000 FC Kit includes multimeter, ac ...
Description:
The Fluke v3000 FC Kit includes multimeter, ac voltage module and accessories. AC and DC voltage measurements to 1000V AC and DC current with 0.01 mA resolution Continuity, resistance, diode test, capacitance and frequency measurements MIN/MAX recording CAT III 1000 V, Cat IV 600 VIP54.
All-Metal Versions as Well as Types for Insulated ...
Description:
All-Metal Versions as Well as Types for Insulated Fitting. Shock-Proof Safety Sockets for Use Up to 1000 V.Safety Sockets to Adapt From Old 4 Mm Sockets.Terminations for Printed Circuit Board, for Cable Lugs or with Push-On Connection.Loading Up to 32 A.Nickel-Plated or Gold-Plated Versions.
Slim-Line Binding Post, 15 Amps, 1000V. The BU‐P4243 ...
Description:
Slim-Line Binding Post, 15 Amps, 1000V. The BU‐P4243 is a slim‐line binding post which accepts non‐shrouded and retractable 4mm banana plugs as well as bare wire and 7mm (ID) spade connectors. Internal wires connected by solder post.Material: Bright Tin Plated Brass with Polycarbonate Insulators and High Temp ABS Spacer Panel ...
Schutzinger 4mm panel mount socket connectors , these ...
Description:
Schutzinger 4mm panel mount socket connectors , these IBU 5568 series threaded socket connectors feature a single pole and are utilised for the transmission of voltages, currents and electrical test data, part of the Shutzinger Ø 4mm programme range. Maximum panel thickness 5mm4.8mm x 0.8mm tab Nickel plated contact parts ...