Fluke I1010 Multimeter Current Clamp Adapter, 1000A dc, 600A ac, 30mm With UKAS Calibration

  • RS Stock No. 459-3578
  • Mfr. Part No. i1010
  • Brand Fluke
Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): TH
Product Details

Fluke Current Probes

Rugged current clamp adaptor suitable for use with multimeters to give non intrusive measurement of d.c. and a.c. current. Integral 1.2m 4mm shrouded plug lead.

Jaws accept conductor size of 1 x 30mm or 2 x 25mm dia.
d.c. current zero control for nulling out jaw/sensor offset
Superior noise immunity allows measurement in electrically noisy environments, such as adjustable speed drive line-side and load currents
Shielded, heat-resistant silicon rubber cable connects clamp to digital multimeter
Battery check mode
Compatible with meter input impedance ≥1MΩ
Conforms to IEC 1010-1 Cat III 600V

Supplied With: 9V PP3 alkaline battery and operators manual.

Specifications
Attribute Value
Adapter Type AC/DC
Maximum DC Current 1000A
Maximum AC Current 600A ac
Best Accuracy ±2% + 0.5 A
Calibrated UKAS
Maximum Conductor Size 30mm
Safety Category CAT III 600 V
Output Type Voltage
Connector Type Banana Plug
Battery Type 9V
Battery Life 60 h
Maximum Operating Temperature +50°C
Minimum Operating Temperature -10°C
Safety Category Level CAT III
Safety Category Voltage 600V
Model Number p I1010
13 In stock for delivery within 2 working days
Price Each
£ 476.00
(exc. VAT)
£ 571.20
(inc. VAT)
Units
Per unit
1 +
£476.00
Not available for guaranteed pre 9am/10am delivery
Related Products
ICA39T from the RS Pro range of current ...
Description:
ICA39T from the RS Pro range of current clamp adapters. 1.9% basic D CA / A CA accuracyNon-intrusive transducingUp to 29 mm Diameter conductorShock Proof: 5 ft dropCoiled cable output plugsErgonomically designed jaw and triggerAC-DC 1000 A capabilityAuto-zero key for DCARed LED - low battery indicationGreen LED - power on ...
These compact, lightweight and ergonomic sensors of varying ...
Description:
These compact, lightweight and ergonomic sensors of varying diameters are capable of clamping all types of conductors, whatever their number, dimensions or shape (bars, etc.). Due to their flexibility, they can be used in any location, however cramped. They are ideal for the requirements in both industry and the tertiary ...
Single and dual range mini clamps with nominal ...
Description:
Single and dual range mini clamps with nominal current measuring range of 0.5A to 200A ac40Hz to 10kHz bandwidthMN09, MN11 & MN21 ac current output 1mA ac / 1A ac for use with multimeters & recorders with a 200mA ac rangeMN13, MN39 ac voltage output 10mV ac / 1A ac ...
The i30 may be used in conjunction with ...
Description:
The i30 may be used in conjunction with multimeters, recorders and other suitable recording instruments for accurate non-intrusive ac & dc current measurement.,Applications include: inverters, switch mode power supplies, industrial controllers, automotive leakage currents and other applications requiring accurate isolated current measurement. Hall effect sensing of a.c. and d.c. current ...