Wall Base for use with Symphoni LX Wall Beacons

  • RS Stock No. 824-6138
  • Mfr. Part No. SY Base-LX-W/RF/W1
  • Brand Fulleon
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

Fulleon Symphoni LX Wall Sounder Beacon

The Symphoni LX Wall is ideal for applications that require both a visual and audible alarm. This sounder and beacon is a reliable, high performing VAD (Visual Alarm Device) that is certified to EN 54-23. It is recommended for wall mounting and requires only one installation point. Its high sound output makes it suitable for open areas or where there is higher than normal background noise. Not only is the Symphoni LX available as a dual alarm device but it is also available as a base only unit it, which can be used with any existing Symphoni sounders.

Super low current sounder
LED technology for long life and low current consumption
Up to 7.5m coverage volume (switchable to 2.5m)
0.5 or 1Hz flash rate (switch to 0.5Hz to reduce current consumption)
Delivering up to 100 dB (A) sound output
IP65 protection
White or Red

Note

Super low current consumption, can be retrofitted with existing Symphoni sounders including Symphoni High Output.

Standards

EN 54-23.

Specifications
Attribute Value
For Use With Symphoni LX Wall Beacons
Accessory Type Wall Base
Dimensions 147 x 106 mm
Available to back order for despatch 21/11/2019
Price Each
Was £22.58
£ 9.22
(exc. VAT)
£ 11.06
(inc. VAT)
Units
Per unit
1 +
£9.22
Related Products
The LEDA100 economy series incorporate a piezo buzzer, ...
Description:
The LEDA100 economy series incorporate a piezo buzzer, situated in the base of the unit, that is synchronised to the flash rate offering a combined audible & visual warning signal (Note: the buzzer cannot be controlled independently of the light).These beacons have two selectable stages of alarm, flashing or continuous ...
The X450 Xenon beacon is suitable for Industrial ...
Description:
The X450 Xenon beacon is suitable for Industrial & Marine signalling applications where a visual signal is required to operate in very harsh environmental conditions.The beacons have a flashing mode light effect (single stage alarm). Xenon beacons (sometimes called strobes) are controlled via a PCB and put out a very ...
The LEDD100 economy series are suitable for light ...
Description:
The LEDD100 economy series are suitable for light commercial & industrial signalling applications where local indication is required. These beacons have two selectable stages of alarm, flashing or continuous (static) mode, selectable by a jumper link on the PCB. The design also allows for a third wire connection giving flexibility ...
The LEDES100 economy series from Moflash has an ...
Description:
The LEDES100 economy series from Moflash has an E27 Edison screw cap fitted into the base of the beacon. This design lends itself for use in temporary signalling locations where a warning or hazard is not normally present, or has the ability to be installed in an area using existing ...