ROHM BD63130AFM-E2 Motor Driver IC 36-Pin, HSOP

View all Motor Driver ICs
Unavailable
RS will no longer stock this product.
RS Stock No.:
185-0284
Mfr. Part No.:
BD63130AFM-E2
Brand:
ROHM
Find similar products by selecting one or more attributes.
Select all

Brand

ROHM

Output Configuration

DMOS

Configuration

H Bridge

Maximum Output Current

3 (Continuous) A, 4 (Peak) A

Maximum Supply Voltage

46.2 V

Mounting Type

Surface Mount

Package Type

HSOP

Pin Count

36

Maximum Operating Supply Voltage

46.2 V

Minimum Operating Supply Voltage

8 V

Minimum Operating Temperature

-25 °C

Product Height

2.2mm

Width

7.5mm

Height

2.2mm

Product Length

18.5mm

Length

18.5mm

Maximum Operating Temperature

+85 °C

Product Width

7.5mm

Dimensions

18.5 x 7.5 x 2.2mm

BD63130AFM is one H-bridge motor driver for DC brush motor. This driver can facilitate low power consumption by direct PWM or PWM constant current control. There are built in protection circuits in this IC. It is possible to output an abnormal detection signal for Wired-OR that notifies each protection circuit operation, which contributes to set high reliability.

Single Power Supply Input (rated voltage of 50V)
Rated Output Current (peak): 3.0A(4.0A)
Low ON-Resistance DMOS Output
Forward, Reverse, Brake, Open
Power Save Function
External PWM Control
PWM Constant Current Control (current limit function)
Built-in Spike Noise Cancel Function (external noise filter is unnecessary)
Driver for DC Brush Motor
Built-in Logic Input Pull-down Resistor
Cross-conduction Prevention Circuit
Output Detection Signal during Abnormal states (Wired-OR)
Thermal Shutdown Circuit (TSD)
Over-current Protection Circuit (OCP)
Under Voltage Lock out Circuit (UVLO)
Over Voltage Lock out Circuit (OVLO)
Ghost Supply Prevention (protects against malfunction when power supply is disconnected)
HSOP-M36 package