STMicroelectronics X-NUCLEO-IHM14A1 Stepper Motor Driver Expansion Board Stepper Expansion Board for X-NUCLEO-IHM14A1

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

The X-NUCLEO-IHM14A1 motor driver expansion board is based on the STSPIN820 monolithic driver for stepper motors. It represents an affordable, easy-to-use solution for driving stepper motors in your STM32 Nucleo project, implementing motor driving applications such as 2D/3D printers, robotics and security cameras. The STSPIN820 implements a PWM current control with constant OFF time adjustable via an external resistor and a microstepping resolution up to the 256th step.

Operating voltage: 7 to 45 V
Output current up to 1.5 Arms
Fine tuning microstepping up to the 256th step
Current control with adjustable OFF time
Full protection set:
Overcurrent protection
Short-circuit protection
Under voltage lock out
Thermal shutdown
Compatible with Arduino UNO R3 connector
Compatible with STM32 Nucleo boards
RoHS compliant

Specifications
Attribute Value
Kit Name Stepper Motor Driver Expansion Board
Kit Classification Expansion Board
For Use With Arduino UNO R3, STM32 Nucleo
Motor Type Stepper
Featured Device X-NUCLEO-IHM14A1
27 In stock for FREE next working day delivery
Price Each
£ 12.35
(exc. VAT)
£ 14.82
(inc. VAT)
Units
Per unit
1 +
£12.35
Related Products
The STEVAL-ESC001V1 is an electronic speed controller (ESC) ...
Description:
The STEVAL-ESC001V1 is an electronic speed controller (ESC) board for a three-phase Brushless motor (BLDC/PMSM). It demonstrates a sensorless FOC algorithm with speed regulation and active braking. The board is designed to provide fast and efficient propulsion for remote control applications like electric cars, boats and UAV drones. • 72MHz ...
The ATSAMD21BLDC24V-STK is a low-voltage BLDC/PMSM motor control ...
Description:
The ATSAMD21BLDC24V-STK is a low-voltage BLDC/PMSM motor control starter kit. The kit consists of a high-current driver board with sensing circuits and a plug-in ATSAMD21 microcontroller board. • 6 x NTMFS5C646NL power MOSFETs configured as 3 x half-bridge drivers • 3 x NCP5106A High-Side/Low-Side MOSFET gate drivers • On-board AT25DF0181A ...
The LB1938FA is an H-bridge motor driver that ...
Description:
The LB1938FA is an H-bridge motor driver that supports low-voltage drive and features low-saturation outputs in an ultra-miniature slim package. The LB1938FA provides forward, reverse, brake, and standby modes controlled by two input signals, and is an optimal DC motor driver for notebook personal computers, digital cameras, cell phones, and ...
The LB1909MC is a low saturation voltage stepping ...
Description:
The LB1909MC is a low saturation voltage stepping motor driver IC. It is optimal for motor drivers in 12V system products. Current consumption 0 in standby mode The compact package (MFP-10S) is adopted. VCC max = 20V, IO max = 0.8ABIP output transistor adoption (Upper and lower total Vo(sat)=0.5V(typical) at ...