ON Semiconductor LV8731VGEVB H-Bridge Driver IC Evaluation Board Stepper Evaluation Board for LV8731V-TLM-H for

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

The LV8731V is a 2-channel H-bridge driver IC that can switch a stepping motor driver, which is capable of micro-step drive and supports 1/16-step resolution, and two channels of a brushed motor driver, which supports forward, reverse, brake, and standby of a motor.

Single-channel PWM current control stepping motor driver (selectable with DC motor driver channel 2) incorporated
BiCDMOS process IC
Micro-step mode can be set to Full-step, Half-step, Quarter-step, or 1/16-step
Excitation step proceeds only by step signal input
Motor current selectable in four steps
Output short-circuit protection circuit (selectable from latch-type or auto-reset-type) incorporated
Unusual condition warning output pins
Built-in thermal shutdown circuit
No control power supply required
Pin compatibility series

Specifications
Attribute Value
Kit Name H-Bridge Driver IC Evaluation Board
Kit Classification Evaluation Board
For Use With Brushed Motor Drive, Stepping Motor Drive, 2-Channel H Bridge Drive
Motor Type Stepper
Featured Device LV8731V-TLM-H
7 In stock for FREE next working day delivery
Price Each
£ 34.53
(exc. VAT)
£ 41.44
(inc. VAT)
Units
Per unit
1 - 4
£34.53
5 +
£33.66
Related Products
Description:
The Haptic click is an add-on board that driver ERM (Eccentric Rotating Mass) and LRA (Linear Resonant Actuator) vibration motors. A Motor Haptic Driver (Texas Instruments DRV2605L) includes a haptic-effect library with over 100 haptic effects. Audio interface (3.5 mm jack) for audio-to-vibe effectsScrew terminals for connecting ERM and LRA ...
The STEVAL-ESC001V1 is an electronic speed controller (ESC) ...
Description:
The STEVAL-ESC001V1 is an electronic speed controller (ESC) board for a three-phase Brushless motor (BLDC/PMSM). It demonstrates a sensorless FOC algorithm with speed regulation and active braking. The board is designed to provide fast and efficient propulsion for remote control applications like electric cars, boats and UAV drones. • 72MHz ...
The X-NUCLEO-IHM12A1 is a dual low-voltage brushed DC ...
Description:
The X-NUCLEO-IHM12A1 is a dual low-voltage brushed DC motor driver expansion board based on the STSPIN240 quad half-bridge chip. The device is designed for battery-powered applications and can be forced into a zero-consumption state, yielding a significant increase in battery life. • Operating voltage range: +1.8 to +10Vdc • Output ...
The X-NUCLEO-IHM13A1 is a low-voltage brushed DC motor ...
Description:
The X-NUCLEO-IHM13A1 is a low-voltage brushed DC motor driver expansion board based on the STSPIN250 quad half-bridge chip. The device is designed for battery-powered applications and can be forced into a zero-consumption state, yielding a significant increase in battery life. • Operating voltage range: +1.8 to +10Vdc • Output current: ...