Omron Phase Monitoring Relay, 3 Phase, SPDT, DIN Rail
- RS Stock No.:
- 819-3267
- Mfr. Part No.:
- K8AKPM2380480VAC
- Brand:
- Omron
Stock information currently inaccessible
- RS Stock No.:
- 819-3267
- Mfr. Part No.:
- K8AKPM2380480VAC
- Brand:
- Omron
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Omron | |
| Monitoring Application | Phase | |
| Electrical Phase | 3 | |
| Contact Configuration | SPDT | |
| Mounting Type | DIN Rail | |
| Phase Sensitivity | Overvoltage, Phase Loss, Phase Sequence, Undervoltage | |
| Time Delay | 0.1 → 30s | |
| Series | K8AK-PM | |
| Terminal Type | Screw | |
| Minimum Operating Temperature | -20°C | |
| Height | 90mm | |
| Length | 100mm | |
| Operating Temperature Range | +60°C | |
| Dimensions | 100 x 22.5 x 90mm | |
| Maximum Operating Temperature | +60°C | |
| Width | 22.5mm | |
| Select all | ||
|---|---|---|
Brand Omron | ||
Monitoring Application Phase | ||
Electrical Phase 3 | ||
Contact Configuration SPDT | ||
Mounting Type DIN Rail | ||
Phase Sensitivity Overvoltage, Phase Loss, Phase Sequence, Undervoltage | ||
Time Delay 0.1 → 30s | ||
Series K8AK-PM | ||
Terminal Type Screw | ||
Minimum Operating Temperature -20°C | ||
Height 90mm | ||
Length 100mm | ||
Operating Temperature Range +60°C | ||
Dimensions 100 x 22.5 x 90mm | ||
Maximum Operating Temperature +60°C | ||
Width 22.5mm | ||
K8AH-PM2 Monitoring Relay.
• Resistant to inverter noise.
• Monitors over voltage, under voltage, phase sequence and loss for 3 and 4 wire power supplies.
• Switch setting.
• 2 x SPDT output relays.
• 5 A (resistive load) at 250 V ac
K8AK-PM2 Model.
3-phase 3 wire mode, 380, 400, 415, 480 V ac.
3-phase 4 wire mode, 220, 230, 240, 277 V ac.
3-phase 3 or 4 wire input rages is switched using a DIP switch.
Power supply voltage is the same as the rated input value.
Features and Benefits.
• Input load 4.4 VA
• Automatic reset method.
• Power on LOCK time 1 s/5s (changed with the DIP Switch).
• Two SPDT relays NC (normally closed)
• Power (PWR) indicator – Green.
• Relay (RY) output – Yellow.
• Over / under - Red
• Case is PC and ABS, UL 94-V-0, N1.5.
• Weight 150 g.
• DIN Rail mounted.
• Protection IP 20
What is a Monitoring / Measuring Relay?
A monitoring / measuring relay is a protective control device, various types are available suiting what you wish to monitor. The relays receive input signals then monitor them and then output an alarm signal when a set value is reached (alarm relays). The relays protect your equipment against over voltage and over current faults. Monitoring relays monitor AC power supplies, voltage and current, analogue signals detecting unusual activity in equipment against set alarm thresholds.
Types of Monitoring Relays Available?
• Motor protection relays
• Temperature monitoring relays
• Water level control relays
• Voltage
• Current
• Temperature monitoring relays
• Water level control relays
• Voltage
• Current
Standards
EN 60947-5-1, UL 508, IP 20