Microchip, 32bit microAptiv UC 32 bit, PIC32 Microcontroller, 25MHz, 64 kB Flash, 28-Pin SDIP

View all Microcontrollers
Unavailable
RS will no longer stock this product.
RS Stock No.:
146-8937
Mfr. Part No.:
PIC32MM0064GPL028-I/SP
Brand:
Microchip
Find similar products by selecting one or more attributes.
Select all

Brand

Microchip

Family Name

PIC32

Package Type

SDIP

Mounting Type

Through Hole

Pin Count

28

Device Core

microAptiv UC 32 bit

Data Bus Width

32bit

Program Memory Size

64 kB

Maximum Frequency

25MHz

RAM Size

8 kB

USB Channels

0

Number of PWM Units

1

Number of SPI Channels

2

Number of CAN Channels

0

Number of I2C Channels

2

Typical Operating Supply Voltage

2 → 3.6 V

Number of UART Channels

2

Number of USART Channels

0

Number of LIN Channels

2

Height

3.81mm

Data Rate

25Mbit/s

Width

7.37mm

Dimensions

35.56 x 7.37 x 3.81mm

Pulse Width Modulation

1 (8 Channel)

Number of Ethernet Channels

0

Number of PCI Channels

0

Program Memory Type

Flash

Minimum Operating Temperature

-40 °C

Instruction Set Architecture

RISC

Maximum Number of Ethernet Channels

0

ADCs

12 x 10/12 bit

Length

35.56mm

Number of ADC Units

1

Maximum Operating Temperature

+105 °C

PIC32MMxxxxGPL 32-Bit Microcontrollers


Microchip 32-bit PIC32MM family microcontrollers with microAptiv™ UC core and ECC Flash program memory. They feature the microMIPS™ instruction set for 35% smaller code while retaining 98% performance compared to MIPS32 processors. These PIC32MM MCUs are from Microchip's lowest power and most cost-effective family of 32-bit PIC32 microcontrollers. They are high performance general purpose MCUs ideal for applications demanding low power and longer battery life.

Featuring core-independent peripherals, these MCUs offload key fucntions from the CPU. The devices are fully supported by Microchip’s MPLAB® Code Configurator (MCC) software to help simplify designs. Typical target applications include IoT sensor nodes, environmental monitoring devices, portable medical or fitness devices, building automation/control and low-cost motor control applications.

Microcontroller features:


High-performance 32-Bit RISC CPU
microMIPS™ instruction set
16-bit/32-bit wide instructions with 32-bit wide data path
Two sets of 32 register files (32-bit) to reduce interrupt latency
Single-cycle 32 x 16 multiply and two-cycle 32 x 32 multiply
+2.0 to +3.6V operating voltage
Low-power operation: 500 nA sleep current for RAM retention mode

Analogue features:


Up to 14-channel, software-selectable 10/12-Bit SAR ADC
Two analogue comparators with input multiplexing
5-bit DAC with output pin

Peripheral features:


Two 4-wire SPI modules (up to 25 Mbps) with I²S
Two UART modules with LIN
CRC module
Hardware real-time clock and calendar (RTCC)
Seven 16-Bit Timers
One multiple output module and two single output modules
Up to 20 peripheral pin select (PPS) re-mappable pins
Two configurable logic cells with internal connections to select peripherals and PPS

The extreme low power PIC32MM GPM family extends Microchip's lowest power and most cost-effective family of 32-bit PIC32 microcontrollers by adding USB and ECC memory up to 256KB.

Low-Power Operation
Hardware Divide Unit
Zero Wait State Flash with ECC to Maximize Endurance/Retention
10-bit, 300K samples/second conversion rate (single Sample-and-Hold)
Two Analog Comparators with Input Multiplexing
5-Bit DAC with Output Pin
Two 4-Wire SPI modules (up to 25 Mbps) with I2S
Two UART modules with LIN
CRC module
Hardware Real-Time Clock and Calendar
Up to 20 Peripheral Pin SelectRemappable Pins
Capture/Compare/PWM/Timer modules:
Two 16-bit timers or one 32-bit timer in each module
PWM resolution down to 21 ns
Six PWM outputs
Programmable dead time
Auto-shutdown


High-performance 32-bit microcontrollers designed for: High Impact Graphics/User Interfaces, Ethernet/USB/CAN Connectivity, Multitasking Embedded Control, High Performance Audio