Keil 32 bit Development Kit MCB2370 KEI
- RS Stock No.:
- 384-929
- Mfr. Part No.:
- MCB2370 KEI
- Brand:
- Keil
Image representative of range
Stock information currently inaccessible
- RS Stock No.:
- 384-929
- Mfr. Part No.:
- MCB2370 KEI
- Brand:
- Keil
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Keil | |
| Classification | Development Kit | |
| Technology | 32 bit | |
| Select all | ||
|---|---|---|
Brand Keil | ||
Classification Development Kit | ||
Technology 32 bit | ||
- COO (Country of Origin):
- DE
MCB2370 LPC2378 Evaluation Board
The Keil MCB2370 Evaluation Board provides an introduction to the NXP LPC2378 ARM microcontroller.
Standard connectors for USB 2.0
DB9 connectors for both of the LPC23xx serial ports
DB9 connectors for CAN communication
RJ-45 connector for Ethernet communication
2-line by 16-character LCD display. Can show real-time debug and program status messages
LF Amplifier connects the DAC output of the LPC23xx device to a speaker
Adjustable analogue voltage source for testing the Analog to Digital output feature of the LPC23xx
JTAG interface coupled with the ULINK USB-JTAG adapter allows Flash programming
The on-chip debug interface can perform real-time in-circuit emulation
DB9 connectors for both of the LPC23xx serial ports
DB9 connectors for CAN communication
RJ-45 connector for Ethernet communication
2-line by 16-character LCD display. Can show real-time debug and program status messages
LF Amplifier connects the DAC output of the LPC23xx device to a speaker
Adjustable analogue voltage source for testing the Analog to Digital output feature of the LPC23xx
JTAG interface coupled with the ULINK USB-JTAG adapter allows Flash programming
The on-chip debug interface can perform real-time in-circuit emulation
Note
To run the Keil debugger using JTAG emulation, you need a ULINK USB-JTAG Adapter and two USB cables. To program the MCB2300 using the Flash Magic Utility, you need a serial cable, 9-pin male to 9-pin female, no longer than 10ft/3m, wired one-to-one.
Supplied with
μVision IDE Quick Start Guide, ARM Development Tools Overview, RealView MDK-ARM Evaluation Tools