Round Leaded Gunmetal Metal Tube, 2in OD, 1in ID, 13in L, 2in W, 1in Thickness
- RS Stock No.:
- 181-9445
- Brand:
- RS PRO
Bulk discount available
Subtotal (1 unit)*
£411.98
(exc. VAT)
£494.38
(inc. VAT)
FREE delivery for orders over £50.00
Temporarily out of stock
- Shipping from 10 December 2025
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units | Per unit |
|---|---|
| 1 - 2 | £411.98 |
| 3 - 5 | £383.14 |
| 6 - 11 | £362.54 |
| 12 + | £329.58 |
*price indicative
- RS Stock No.:
- 181-9445
- Brand:
- RS PRO
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | RS PRO | |
| Tube Form | Round | |
| Material | Leaded Gunmetal | |
| Length | 13in | |
| Width | 2in | |
| Inner Diameter | 1in | |
| Thickness | 1in | |
| Outer Diameter | 2in | |
| Tensile Strength | 241 Mpa | |
| Hardness | 65 HB | |
| Suitability | Bearings, Bushings, Gears, Piston Rings, Pumps | |
| Density | 0.322lb/in³ | |
| Thermal Conductivity | 33.6Btu | |
Select all | ||
|---|---|---|
Brand RS PRO | ||
Tube Form Round | ||
Material Leaded Gunmetal | ||
Length 13in | ||
Width 2in | ||
Inner Diameter 1in | ||
Thickness 1in | ||
Outer Diameter 2in | ||
Tensile Strength 241 Mpa | ||
Hardness 65 HB | ||
Suitability Bearings, Bushings, Gears, Piston Rings, Pumps | ||
Density 0.322lb/in³ | ||
Thermal Conductivity 33.6Btu | ||
RoHS Status: Exempt
- COO (Country of Origin):
- GB
Leaded Gunmetal, (Cast Lead Bronze)
A general purpose free-machining lead bronze. Although lower in tensile strength than phosphor bronze, it possesses good bearing properties with the ability to conform to minor shaft misalignments. The presence of lead reduces friction, running temperature and the possibility of seizure under conditions of poor lubrication.
Supplied in 13in lengths
Supplied in 13in lengths
Conforms to SAE 660 (SAE 660 can also be used as an alternative to BS 1400 LB4)
Typical applications - bearings, bushes, washers and linings and for conditions with less than adequate lubrication. It may also be used in conjunction with softer shaft materials than would be recommended for the harder lead-free phosphor bronze.
Standards
SAE 660; CuSn7Pb7Zn3 (ISO); BS 1400 LG4 (British); DIN 1705 Rg7 (German)