Keep your system on the straight and narrow with this connector accessory from Belden Hirschmann. It's a central screw designed to go through the middle of a solenoid valve connector and keep your setup steady. You can rotate it in 90° increments to adjust it through four positions. The knurled head lets you achieve a strong grip so you can tighten and loosen it by hand.

• Strong glass-filled nylon housing resists impacts
• Notch in head accommodates a slotted screwdriver for convenient fastening

• Hydraulic equipment
• Chemical plants
• Food production

A solenoid valve opens and closes the air passageway of your pneumatic system by raising and dropping its internal plunger.

You can use this screw with any valve connectors from the GDM and GM series, so it's a versatile option.

Type A DIN 43650 Hirschmann

A comprehensive range of cable sockets, appliance connector bases and accessories typically for use with solenoid valves on pneumatic and hydraulic equipment. The inner connector can be rotated through 90° increments so the gland can be positioned in all four directions. Housing material is glass-filled nylon making them impact resistant.,All Hirschmann appliance connectors feature terminals that can be screwed onto bare or ferruled conductors, or will accept crimp ring/fork terminals under the head of the screw.,All are supplied complete with centre retaining screw, while plug bases are solder terminated and supplied with fixing screws. Suitable gasket to provide IP65 sealing, stock-no. 156-4729. Supplied in bags of 10