RS PRO Barrel Digital Magnetic Pickup, 2.5 mm Detection Range, 5 15 V dc

Technical Reference
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): US
Product Details

Digital Magnetic Pick-Up

An ’active’ version of the standard type (Stock no. 304-166) but incorporating an IC to provide a digital output compatible with most logic systems
Requires a peripheral speed greater than 250mm per second to operate
Rise and fall times and amplitude of the output pulse are independent of the characteristics and speed of discontinuity
Output Characteristics: With no discontinuity moving in fromt of the pole piece, the output voltage will be less than 0.15V. For each discontinuity passing the pole piece, a positive pulse will be produced. To calculate the output pulse amplitude for various loads the following relationship may be used:

VO = VS x RL / (RL + 5000)
Where
VO = Amplitude of output pulse (Volts)
VS = Supply voltage (volts, dc)
RL = Load impedance (ohms)
5000 = Approximate output impedance (ohms)

Caution

Not polarity protected, any momentary reversal of the supply voltage will destroy the device.

//media.rs-online.com/t_line/L304172-01.gif
//media.rs-online.com/t_line/LD304172-01.gif
//media.rs-online.com/t_line/LI304172-01.gif

Magnetic Pick-Ups

Miniature magnetic 'pick-up' transducers suitable for use in a wide range of sensing applications. Each device responds to movement of ferrous parts past the pole on the end of the unit. Used extensively in areas such as speed regulation of motors, when sensing for example, the teeth on a gear wheel. However, magnetic pick-ups may be used to implement feedback and control functions in many fields. Automotive applications include crank angle sensing, ignition timing, anti-skid systems and diagnostics. Applications in the computer peripherals area encompass disc drives, line printers, card punches/readers and printer terminals. The diagrams indicate the two basic modes of using these components. Note especially their small size in relation to their high signal output, enabling their deployment where many conventional sensors cannot be fitted. Fully encapsulated construction for reliable operation, but not intended for immersion in liquids.

Specifications
Attribute Value
Body Style Barrel
Output Type Digital
Detection Range 2.5 mm
Terminal Type Wire Lead
Thread Size 1/4-40 UNS-2A
Supply Voltage 5 15 V dc
Housing Material Stainless Steel
Minimum Operating Temperature -25°C
Maximum Operating Temperature +85°C
Dimensions 6.35 (Dia.) x 28.6 mm
Length 28.6mm
305 In stock for FREE next working day delivery
Price Each
£ 33.60
(exc. VAT)
£ 40.32
(inc. VAT)
Units
Per unit
1 - 4
£33.60
5 - 9
£31.92
10 +
£30.24
Related Products
Magnetic cylinder sensors are used for detection, measuring ...
Description:
Magnetic cylinder sensors are used for detection, measuring and positioning in many crucial tasks. PA12 plastic body material Suitable for T-slot and round-slot cylinders PNP NO or reed switch PNP output types have short circuit and reverse polarity protection LED status display.
Magnetic cylinder sensors are used for detection, measuring ...
Description:
Magnetic cylinder sensors are used for detection, measuring and positioning in many crucial tasks. PA12 plastic body material Suitable for T-slot and round-slot cylinders PNP NO or reed switch PNP output types have short circuit and reverse polarity protection LED status display.
The AA747 position sensors from Sensitec are designed ...
Description:
The AA747 position sensors from Sensitec are designed to detect angle and length. Based on the AMR effect (anisotropic magnetoresistive), the AA747 sensors contain two independent Wheatstone bridges with common ground and supply pin. Features & Benefits Proximity angle measurement Proximity length and position measurement Large working distance High accuracy ...
MHRM sesnors employ a magnetically based semiconductor hall ...
Description:
MHRM sesnors employ a magnetically based semiconductor hall element to sense moving ferromagnetic objects. They are preferably used to scan toothed racks as well as gear wheels in gear boxes. The housing made of Stainless Steel protects the electronics against external influences. These sensors are mainly used as tachometer generators ...