ROHM BD00FA1WEFJ-E2, LDO Voltage Regulator Controller, 100mA Adjustable, 3 → 12 V, ±1% 8-Pin, HTSOP

  • RS Stock No. 184-7681
  • Mfr. Part No. BD00FA1WEFJ-E2
  • Brand ROHM
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

BD00FA1WEFJ is an LDO regulator with output current capability of 0.1A. The Output voltage can be varied from 3.0V to 12.0V using external resistors with ±1% reference voltage accuracy. The HTSOP-J8 package can be used in wide variety of digital appliances. As protective function to prevent IC from destruction, this chip has built-in over current protection circuit to protect the device when output is shorted, zero μA shutdown mode, and built-in thermal shutdown circuit to protect the IC during thermal over load conditions. This product can be used in wide variety of digital appliances. This regulator can use ceramic capacitor, which have smaller size and longer life than other capacitors.

Built-in high accuracy reference voltage circuit
Built-in Over current protection circuit (OCP)
Built-in Temperature protection circuit (TSD)
Zero μA shutdown mode
Soft start function

Specifications
Attribute Value
Dropout Voltage at Maximum Current 3 V @ 0.1 A
Output Voltage 3 → 12 V
Output Type Adjustable
Package Type HTSOP
Maximum Output Current 100mA
Mounting Type Surface Mount
Minimum Input Voltage 3 V
Maximum Input Voltage 25 V
Pin Count 8
Number of Outputs 1
Accuracy ±1%
Minimum Operating Temperature -25 °C
Maximum Operating Temperature 85 °C
Width 3.9mm
Height 0.85mm
Reference Voltage 0.8V
Line Regulation 1 %
Length 4.9mm
Dimensions 4.9 x 3.9 x 0.85mm
Load Regulation 1.5 %
Enable Yes
25 In stock for delivery within 5 working days
Price Each (In a Pack of 25)
£ 0.30
(exc. VAT)
£ 0.36
(inc. VAT)
Units
Per unit
Per Pack*
25 - 100
£0.30
£7.50
125 - 225
£0.268
£6.70
250 - 475
£0.242
£6.05
500 +
£0.221
£5.525
*price indicative
Not available for guaranteed pre 9am/10am delivery
Packaging Options:
Related Products
ROHM's LDO regulators continue the trend towards increasing ...
Description:
ROHM's LDO regulators continue the trend towards increasing miniaturization and greater power efficiency and are optimized for power supplies of all types. The broad lineup includes low saturation fixed output types in 1A/2A/0.3A ratings, models with different output voltages and packages, and units with/without a shutdown switch. In addition, overcurrent, ...
The MIC49300 is a high-bandwidth, low-dropout, 3.0A voltage ...
Description:
The MIC49300 is a high-bandwidth, low-dropout, 3.0A voltage regulator ideal for powering core voltages of low-power microprocessors. The MIC49300 implements a dual supply configuration allowing for very low output impedance and very fast transient response. VIN: 1.4V to 6.5VVBIAS: 3.0V to 6.5VStable with 1μF ceramic capacitor±1% initial tolerance Maximum dropout ...
The MIC59300 is a high-bandwidth, low-dropout, 3A linear ...
Description:
The MIC59300 is a high-bandwidth, low-dropout, 3A linear voltage regulator ideal for powering core voltages of low-power microprocessors. The MIC59300 implements a dual supply configuration allowing for a very low output impedance and a very fast transient response. VIN = 1.0V to 3.8VVBIAS = 3.0V to 5.5VStable with 1μF ceramic ...
The MIC38300 is a 3A peak, 2.2A continuous ...
Description:
The MIC38300 is a 3A peak, 2.2A continuous output current step down converter. This is the first device in a new generation of High Efficiency Low Dropout (HELDO®) regulators that provide the benefits of an LDO in respect to ease of use, fast transient performance, high PSRR and low noise ...