Robin-Amprobe KMP7030 Loop Impedance & RCD Combined Tester, Loop Impedance Test Type 3 Wire 300V, RCD Test Type AC
- RS Stock No.:
- 794-4938
- Mfr. Part No.:
- KMP7030
- Brand:
- Robin-Amprobe
Currently unavailable
We don’t know if this item will be back in stock, it is being discontinued by the manufacturer.
- RS Stock No.:
- 794-4938
- Mfr. Part No.:
- KMP7030
- Brand:
- Robin-Amprobe
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Robin-Amprobe | |
| Calibrated | RSCAL | |
| Loop Impedance Test Type | 3 Wire | |
| Maximum Voltage Measurement | 300V | |
| RCD Test Type | AC Selective | |
| PSC Display | Yes | |
| Best Loop Test Accuracy | ±2% | |
| RCD Test Current | 25A | |
| Non-Trip Loop Test | Yes | |
| Safety Category | CAT III 300V | |
| Display Type | LCD | |
| Battery Type | AA | |
| Power Source | Battery | |
| Dimensions | 189 x 168 x 85mm | |
| Weight | 1.1kg | |
| Maximum Operating Temperature | +40°C | |
| Safety Category Voltage | 300V | |
| Safety Category Level | CAT III | |
| Model Number p | KMP7030 | |
| Height | 85mm | |
| Minimum Operating Temperature | 0°C | |
| Length | 189mm | |
| Width | 168mm | |
Select all | ||
|---|---|---|
Brand Robin-Amprobe | ||
Calibrated RSCAL | ||
Loop Impedance Test Type 3 Wire | ||
Maximum Voltage Measurement 300V | ||
RCD Test Type AC Selective | ||
PSC Display Yes | ||
Best Loop Test Accuracy ±2% | ||
RCD Test Current 25A | ||
Non-Trip Loop Test Yes | ||
Safety Category CAT III 300V | ||
Display Type LCD | ||
Battery Type AA | ||
Power Source Battery | ||
Dimensions 189 x 168 x 85mm | ||
Weight 1.1kg | ||
Maximum Operating Temperature +40°C | ||
Safety Category Voltage 300V | ||
Safety Category Level CAT III | ||
Model Number p KMP7030 | ||
Height 85mm | ||
Minimum Operating Temperature 0°C | ||
Length 189mm | ||
Width 168mm | ||
RoHS Status: Not Applicable
- COO (Country of Origin):
- CN
KMP7030 Loop Impedance Tester
Using the KMP7030 Loop testing is a quick, convenient, and highly specific method of evaluating an electrical circuit for its ability to engage protective devices (circuit breakers, fuses, RCD's).A "loop" is defined by including unsuspected elements, where current has found parallel paths to ground. Because a ground loop determines the effectiveness of protective devices, it is crucial to be able to measure it, in order to detect and correct problems.
Non trip loop test on passive RCDs
Instant reading
20, 200 and 2000Ω loop measurement ranges
PSC measurement up to 20kA
Displays mains voltage before test
Instant correct wiring status check
Backlight display
Low battery indication
CAT III 300V
Instant reading
20, 200 and 2000Ω loop measurement ranges
PSC measurement up to 20kA
Displays mains voltage before test
Instant correct wiring status check
Backlight display
Low battery indication
CAT III 300V
Supplied with
Mains test cord, test lead set with IEC connector, test probe set, alligtor clip set, batteries (8 x AA), user’s manual, strap and carrying case