Honeywell GLA Series Plunger Limit Switch, NO/NC, IP67, SPDT, Die Cast Zinc Housing, 50V ac Max, 100mA Max
- RS Stock No.:
- 240-2492
- Mfr. Part No.:
- GLAC07B
- Brand:
- Honeywell
Stock information currently inaccessible
Alternative
This product is not currently available. Here is our alternative recommendation.
Each
£329.85
(exc. VAT)
£395.82
(inc. VAT)
- RS Stock No.:
- 240-2492
- Mfr. Part No.:
- GLAC07B
- Brand:
- Honeywell
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Honeywell | |
| Actuator Type | Plunger | |
| Pole and Throw Configuration | SPDT | |
| Normal State Configuration | NO/NC | |
| IP Rating | IP67 | |
| Maximum Current | 100mA | |
| Housing Material | Die Cast Zinc | |
| Maximum AC Voltage | 50V | |
| Maximum DC Voltage | 50V | |
| Connection Type | M20 | |
| Series | GLA | |
| Action Type | Snap Action | |
| Length | 145.8mm | |
| Maximum Operating Temperature | +85°C | |
| Width | 42mm | |
| Depth | 42mm | |
| Minimum Operating Temperature | -25°C | |
| Mechanical Life | 15000000Cycles | |
| Select all | ||
|---|---|---|
Brand Honeywell | ||
Actuator Type Plunger | ||
Pole and Throw Configuration SPDT | ||
Normal State Configuration NO/NC | ||
IP Rating IP67 | ||
Maximum Current 100mA | ||
Housing Material Die Cast Zinc | ||
Maximum AC Voltage 50V | ||
Maximum DC Voltage 50V | ||
Connection Type M20 | ||
Series GLA | ||
Action Type Snap Action | ||
Length 145.8mm | ||
Maximum Operating Temperature +85°C | ||
Width 42mm | ||
Depth 42mm | ||
Minimum Operating Temperature -25°C | ||
Mechanical Life 15000000Cycles | ||
- COO (Country of Origin):
- GB
GLAC07B Limit Switch
Model GLAC07B is a single pole, double throw (SPDT) snap action limit switch. It features one normally open (NO) and one normally closed (NC) contact.
This limit switch has a stainless steel pin plunger on the top of the unit. You can use limit switches with a pin plunger for applications where the operating forces and differentials are small.
GLAC07B has a 20 mm conduit and operating torque of 16 N or 3.6 lb.
This model is completed with gold plated contacts, making it perfect for applications where you are handing low energy loads.
This limit switch has a stainless steel pin plunger on the top of the unit. You can use limit switches with a pin plunger for applications where the operating forces and differentials are small.
GLAC07B has a 20 mm conduit and operating torque of 16 N or 3.6 lb.
This model is completed with gold plated contacts, making it perfect for applications where you are handing low energy loads.
Approvals
UL; CSA
