RS PRO 80 W Electronic LED Lighting Ballast, 220 → 240 V
- RS Stock No.:
- 796-1918
- Brand:
- RS PRO
Currently unavailable
We don’t know if this item will be back in stock, it is being discontinued by the manufacturer.
Alternative
This product is not currently available. Here is our alternative recommendation.
Each
£50.74
(exc. VAT)
£60.89
(inc. VAT)
- RS Stock No.:
- 796-1918
- Brand:
- RS PRO
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | RS PRO | |
| Wattage | 80 W | |
| Ballast Type | Electronic | |
| Supported Lamp Type | LED | |
| Voltage Rating | 220 → 240 V | |
| Dimmable | Yes | |
| Length | 360 mm | |
| Width | 21 mm | |
| Height | 30mm | |
| Minimum Operating Temperature | -25°C | |
| Maximum Operating Temperature | +50°C | |
| Dimming Protocol | DALI | |
Select all | ||
|---|---|---|
Brand RS PRO | ||
Wattage 80 W | ||
Ballast Type Electronic | ||
Supported Lamp Type LED | ||
Voltage Rating 220 → 240 V | ||
Dimmable Yes | ||
Length 360 mm | ||
Width 21 mm | ||
Height 30mm | ||
Minimum Operating Temperature -25°C | ||
Maximum Operating Temperature +50°C | ||
Dimming Protocol DALI | ||
- COO (Country of Origin):
- IT
RS Dimmable Multipower LED Drivers Maxi Jolly 80 Slim HV
The Maxi Jolly 80 Slim HV is a direct current electronic driver, multi-current, for powering LEDs and LED modules. This multi-power LED driver is supplied with dip-switch, for the selection of the output current. The Maxi Jolly 80 Slim HV can power both voltage LED strips and power current LEDs. This power supply delivers high power, with active PFC and flexible selection of the output current.
Multi-power driver supplied with dip-switch for the selection of the output current
Driver for built-in use
It can be used for lighting equipment in protection class I and II.
Active Power Factor Corrector
Analogic input for thermal sensor connection
Current regulation ±5% including temperature variations
Output is not isolated from the input
Stand-by power less than 0,5 W
Protections against overheating, short circuits, mains voltage spikes and overloads
Cannot be switched on and off on secondary circuit for power LED
Driver for built-in use
It can be used for lighting equipment in protection class I and II.
Active Power Factor Corrector
Analogic input for thermal sensor connection
Current regulation ±5% including temperature variations
Output is not isolated from the input
Stand-by power less than 0,5 W
Protections against overheating, short circuits, mains voltage spikes and overloads
Cannot be switched on and off on secondary circuit for power LED
Note
EN 50172 (VDE 0108)
EN 55015
EN 61000-3-2
EN 61000-3-3
EN 61347-1
EN 61347-2-13
EN 61547
EN 62384
EN 62386
EN 55015
EN 61000-3-2
EN 61000-3-3
EN 61347-1
EN 61347-2-13
EN 61547
EN 62384
EN 62386
