Sensata / Cynergy3 ILLS Series Pressure Level Transmitter, 4-20mA Output, Cable, Stainless Steel Body
- RS Stock No.:
- 869-7655
- Distrelec Article No.:
- 304-02-366
- Mfr. Part No.:
- ILLS-G0500-5-007
- Brand:
- Sensata / Cynergy3
Currently unavailable
We don't know if this item will be back in stock, RS intend to remove it from our range soon.
Alternative
This product is not currently available. Here is our alternative recommendation.
Each
£236.37
(exc. VAT)
£283.64
(inc. VAT)
- RS Stock No.:
- 869-7655
- Distrelec Article No.:
- 304-02-366
- Mfr. Part No.:
- ILLS-G0500-5-007
- Brand:
- Sensata / Cynergy3
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
---|---|---|
Brand | Sensata / Cynergy3 | |
Device Type | Pressure | |
Mounting Type | Cable | |
Switch Output | 4-20mA | |
Body Material | Stainless Steel | |
Cable Length | 7m | |
Minimum Operating Temperature | -20°C | |
Maximum Operating Temperature | +60°C | |
Maximum DC Voltage | 32V | |
Maximum Current | 28 mA | |
Maximum Pressure | 10bar | |
Series | ILLS | |
Select all | ||
---|---|---|
Brand Sensata / Cynergy3 | ||
Device Type Pressure | ||
Mounting Type Cable | ||
Switch Output 4-20mA | ||
Body Material Stainless Steel | ||
Cable Length 7m | ||
Minimum Operating Temperature -20°C | ||
Maximum Operating Temperature +60°C | ||
Maximum DC Voltage 32V | ||
Maximum Current 28 mA | ||
Maximum Pressure 10bar | ||
Series ILLS | ||
- COO (Country of Origin):
- GB
Sensata Cynergy3 Level Transmitter, 7m, 28mA - ILLS Series - ILLS-G0500-5-007
Use this Sensata Cynergy3 level transmitter for a precise way to monitor changes in liquid levels inside your tank. It's simple to install and can be lowered into the tank from the top using the supplied cable.
The AC (alternating current) electrode pair inside the transmitter converts the piezo-resistive probes pressure readings into an electrical current. This produces a signal corresponding with the liquid level that's transmitted through the cable to give a precise reading. The cable compensates for any fluctuations in the readings by sending atmospheric pressure to the sensor for greater accuracy.
The AC (alternating current) electrode pair inside the transmitter converts the piezo-resistive probes pressure readings into an electrical current. This produces a signal corresponding with the liquid level that's transmitted through the cable to give a precise reading. The cable compensates for any fluctuations in the readings by sending atmospheric pressure to the sensor for greater accuracy.
Features & Benefits
• Corrosion-resistant stainless steel body material for long-lasting performance
• Long cable length of 7m for deep submersion in large tanks
• Broad operating temperature range of -20°C to +60°C for use in harsh environments
• Typical transmission error of less than 0.5% of the final value for high levels of accuracy
• Long cable length of 7m for deep submersion in large tanks
• Broad operating temperature range of -20°C to +60°C for use in harsh environments
• Typical transmission error of less than 0.5% of the final value for high levels of accuracy
Related links
- Sensata / Cynergy3 ILS Series Pressure Level Transmitter Cable, Stainless Steel Body
- WIKA LH-20 Series Level Sensor Submersible Pressure Transmitter Cable Mount, Stainless Steel Body
- WIKA LF-1 Series Level Sensor Submersible Pressure Transmitter Cable Mount, 1.4404 / 316L Body
- SICK LFH Series Pressure Level Transmitter Stainless Steel Body
- Siemens SITRANS Series Hydrostatic Level Transmitter Level Transmitter Cable, Stainless Steel Body
- ATMI PIEZO AS Series Piezometric Level Sensors Cable Mount, Stainless Steel Body
- WIKA LS-10 Series Level Sensor Level Probe Cable Mount, Stainless Steel Body
- WIKA LH-10 Series Level Sensor Level Probe Cable Mount, Stainless Steel Body