Non-contact measurement up to 3.4 m operating distance / 8.0 m scanning distance limit
Pressure resistant up to 6 bar
Converter protected by PVDF cover for increased resistance
3-in-1: Continuous measurement, switching signal, and display
Analog output can be switched 4 mA ... 20 mA and 0 V ... 10 V
Process connector thread G 1 and G 2
IP67 enclosure rating
Simple operation, also via Connect+

Non-contact measurement in pressurized containers – no wear over time
Easy to set parameters, saving time
Flexible measurement system for different container sizes – standardization and stock reduction
One product for point level and continuous applications, reduces the number of sensors required

The product family UP56 of ultrasonic level sensors is the ideal solution for demanding applications. The teflon-protected transducer handles overpressure up to 6 bar (87 psi) and is resistant against numerous difficult fluids. Wetted parts can be chosen either as stainless steel or PVDF, thus making the UP56 the perfect solution for measurement in aggressive, viscous, or abrasive liquids, or bulk solids. By combining two output signals in one device, new cost-effective solutions can be created for measurement and integration into the system. With two switching outputs, the UP56 can measure dry running and overflow in one device. Combining analog and a switching output enables continuous level measurement with a separate overflow signal. Parameters are easy to set via an integrated display, PC or the connect+ adapter.

Level measurement in the material container
Toner fill level measurement
Checking presence and fill level in the singulation system
Level measurement in the material container
Filling level measurement
Level measurement during material handling
Clogging in a compartment hopper
Dust silo filling level at a dust conveying system in the off-gas system

Product details cover the whole product family. For details on the specifications for this individual product, please refer to the datasheet.