Eaton 2P Pole Isolator Switch - 63A Maximum Current, 22kW Power Rating, IP65
- RS Stock No.:
- 393-9737
- Mfr. Part No.:
- 207238 T5B-1-102/I4/SVB
- Brand:
- Eaton
Subtotal (1 unit)*
£115.80
(exc. VAT)
£138.96
(inc. VAT)
FREE delivery for orders over £50.00
Temporarily out of stock
- 3 unit(s) shipping from 20 October 2025
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units | Per unit |
|---|---|
| 1 + | £115.80 |
*price indicative
- RS Stock No.:
- 393-9737
- Mfr. Part No.:
- 207238 T5B-1-102/I4/SVB
- Brand:
- Eaton
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Eaton | |
| Number of Poles | 2P | |
| Maximum Current | 63A | |
| IP Rating | IP65 | |
| Power Rating | 22kW | |
| Voltage Rating | 440V ac | |
| Electrical Phase | 1 | |
| Accepts Padlocks | Yes | |
| Handle Colour | Red | |
| Normal State Configuration | NO | |
| Auxiliary Contacts Available | Yes | |
| Switch Rating | 1300A | |
| Length | 240mm | |
| Width | 160mm | |
| Depth | 125mm | |
| Minimum Operating Temperature | -25°C | |
| Maximum Operating Temperature | +50°C | |
| Terminal Type | Screw | |
Select all | ||
|---|---|---|
Brand Eaton | ||
Number of Poles 2P | ||
Maximum Current 63A | ||
IP Rating IP65 | ||
Power Rating 22kW | ||
Voltage Rating 440V ac | ||
Electrical Phase 1 | ||
Accepts Padlocks Yes | ||
Handle Colour Red | ||
Normal State Configuration NO | ||
Auxiliary Contacts Available Yes | ||
Switch Rating 1300A | ||
Length 240mm | ||
Width 160mm | ||
Depth 125mm | ||
Minimum Operating Temperature -25°C | ||
Maximum Operating Temperature +50°C | ||
Terminal Type Screw | ||
- COO (Country of Origin):
- GB
Eaton Enclosed Isolator Switch
Eaton's isolator switch can sometimes be referred to as a switch disconnector, this is because it has been created and designed to safely isolate a circuit whilst it is being used or maintained. This isolator switch breaks or isolates a circuit through the rotation of the rotary handle and locking ring. This type of non-fused isolator switch will be found isolating circuit breakers, transmission lines, transformers and a multitude of other applications.
Features & Benefits
• The perfect solution for installing as a safety measure
• Used as an emergency switching off/emergency stop device
• The basic functions: used as a main switch, maintenance switch or manual override switch
• Thermoplastic, high impact surface mounting enclosure with an IP65 rating - this means that the enclosure part of the isolator has ingress protection against dust and is also protected against low-pressure jets of water that comes from all directions
• Built-in earth commoning block
• Lockable in the 0/OFF position, with up to three padlocks
• Totally insulated
• Red rotary handle and yellow locking ring, providing an aesthetically pleasing finish
• Used as an emergency switching off/emergency stop device
• The basic functions: used as a main switch, maintenance switch or manual override switch
• Thermoplastic, high impact surface mounting enclosure with an IP65 rating - this means that the enclosure part of the isolator has ingress protection against dust and is also protected against low-pressure jets of water that comes from all directions
• Built-in earth commoning block
• Lockable in the 0/OFF position, with up to three padlocks
• Totally insulated
• Red rotary handle and yellow locking ring, providing an aesthetically pleasing finish
What is the difference between a fused switch disconnector and a non-fused switch disconnector?
Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary to disconnect or isolate a circuit.
Note
Switch power/capacity refers to AC23A use at 380-440V
Note
Eaton formerly known as Moeller
