ACPL-C87A-000E Broadcom, Isolation Amplifier, 4.5 → 5.5 V, 8-Pin SSOP

  • RS Stock No. 922-6765
  • Mfr. Part No. ACPL-C87A-000E
  • Brand Broadcom
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): PH
Product Details

Isolating Amplifiers, Avago Technologies

The range of isolation amplifier optocouplers from Avago Technologies is ideal for industrial environments where the optocoupler is used to insulate high voltages and isolate any unwanted signals. Sigma-delta modulator technology allows the current and voltage sensor families to provide precise measurements of phase current and bus voltage in motor drives, power inverters and voltage signals in general isolation circuits. These isolation amplifiers offer high CMR (common mode rejection) performance and built-in safety insulation. They are a suitable alternative to the Hall Effect isolation amplifiers, for current and voltage sensing in power converters.

Various types available including:
precision isolation amplifiers
miniature isolation amplifiers
precision optically isolated voltage sensors
isolated linear sensing ICs
isolation amplifiers with short circuit and overload detection
automotive isolation amplifiers

Specifications
Attribute Value
Power Supply Type Single
Typical Single Supply Voltage 4.5 → 5.5 V
Isolation Mode Rejection -78dB
Number of Channels per Chip 1
Maximum Voltage Gain 1.01V/V
Mounting Type Surface Mount
Package Type SSOP
Pin Count 8
Dimensions 5.85 x 6.807 x 3.18mm
Height 3.18mm
Width 6.807mm
Length 5.85mm
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +105 °C
2160 In stock for FREE next working day delivery
Price Each (In a Tube of 80)
£ 3.93
(exc. VAT)
£ 4.72
(inc. VAT)
Units
Per unit
Per Tube*
80 - 320
£3.93
£314.40
400 - 720
£3.537
£282.96
800 +
£3.223
£257.84
*price indicative
Related Products
The NCP2809 is a cost-effective stereo audio power ...
Description:
The NCP2809 is a cost-effective stereo audio power amplifier capable of delivering 135mW of continuous average power per channel into 16Ω loads. The NCP2809 audio power amplifier is specifically designed to provide high quality output power from low supply voltage, requiring very few external components. Since NCP2809 does not require ...
BU7150NUV is Audio Amplifier designed for Single-cell battery ...
Description:
BU7150NUV is Audio Amplifier designed for Single-cell battery operated audio products (VDD = 0.93 ∼ 3.5V, at Ta=0∼85°C). BU7150NUV can be selected in single-ended mode for stereo headphone and BTL mode for mono speaker operations. For BU7150NUV at VDD = 1.5V, THD+N = 1%, the output power is 14mW at ...
BD7836EFV is a low voltage drive class-AB stereo ...
Description:
BD7836EFV is a low voltage drive class-AB stereo speaker amplifier, developed for note-book PC, desktop PC, portable devices and others. Class-AB amplifier has no EMI noise. Adopting power package realize high output power. Low shutdown mode electricity reduce consumption of battery. Shutdown current is 0μA typically. BD7836EFV can use for ...
The TS4871 is an audio power amplifier capable ...
Description:
The TS4871 is an audio power amplifier capable of delivering 1 W of continuous RMS output power into 8 Ω load @ 5 V. This audio amplifier exhibits 0.1% distortion level (THD) from a 5 V supply for a Pout = 250 mW RMS. An external standby mode control reduces ...