ACNT-H511-000E Broadcom, Isolation Amplifier, Maximum of 24 V, 8-Pin SO8

Unavailable
RS will no longer stock this product.
RS Stock No.:
146-4417
Mfr. Part No.:
ACNT-H511-000E
Brand:
Broadcom
Find similar products by selecting one or more attributes.
Select all

Brand

Broadcom

Power Supply Type

Single

Typical Single Supply Voltage

Maximum of 24 V

Number of Channels per Chip

1

Mounting Type

Surface Mount

Package Type

SO8

Pin Count

8

Dimensions

13.6 x 6.24 x 3.6mm

Height

3.6mm

Width

6.24mm

Length

13.6mm

Minimum Operating Temperature

-40 °C

Maximum Operating Temperature

+105 °C

COO (Country of Origin):
PH
ACNT-H511 is a single-channel open collector optocoupler device in 15mm stretched SO8 package. The device is equipped with an insulating layer between the light emitting diode and integrated photon detector to provide electrical insulation between the input and output. Having separate connections for the photodiode bias and output transistor collector reduces the base-collector capacitance and enhances the data speed up to a hundred times compared to a conventional photo-transistor coupler. The ACNT-H511 is well suited for isolated communication logic interface and control in high-voltage power systems such as 1500V PV systems, 690VAC drives, renewable inverters and medical equipment.

TTL Compatible
Open-Collector output
Guaranteed AC and DC performance over wide temperature: -40°C to +105°C
Wide operating Vcc range: 4.5 to 24 V
15mm stretched SO8 package
Internal clearance (DTI): 0.5 mm
40 kV/μs typical common mode rejection (CMR) at VCM = 1500 V
Safety and regulatory approvals
UL 1577 Recognized: 7,500 VRMS for 1 minute
CSA Approved
IEC/EN 60747-5-5 Approved for Reinforced Insulation: VIORM = 2,262 Vpeak and VIOTM = 12,000 Vpeak