FTDI Chip USB to UART Cable for Raspberry Pi - TTL-232R-Rpi

  • RS Stock No. 767-6200
  • Mfr. Part No. TTL-232R-Rpi
  • Brand FTDI Chip
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): ID
Product Details

Raspberry Pi USB to TTL Level Serial UART Converter Cable, FTDI Chip

The TTL-232R-Rpi from FTDI is a USB to TTL level serial UART converter cable designed for use with a Raspberry Pi. Upon inspection, there is a USB connector with USB 2.0 full speed compatibility and 3 single pole 0.1m pitch header that connects to a serial port on the Raspberry Pi board. The cable is configured electrically to process and drive +3.3 V logic level UART signals.

What is the purpose of the cable?

This cable provides a simple method to analyse and debug your Raspberry Pi programming. The cable is connected to the Raspberry Pi ARM processor UART receive/transmit and provides detailed information from the Linux kernel to your PC.

Cable Signal Description

• GND; black - Device ground supply pin. Connects to the RPI ground pin
• TXD; orange - Transmit Asynchronous Data output. Connects to RXD input on RPi board
• RXD; Yellow - Receive Asynchronous Data input. Connects to TXD output on RPi board

TTL-232R-Rpi Key Features

• Internal EEPROM
• Lower Operating and Suspend Current
• Low USB Bandwidth Consumption
• High Output Drive Option
• UART Pin Signal Inversion
• FCC and CE compliant
• 3.3 V TTL inputs
• FCC and CE compliant

Communication Parameters

• Speed: 115200 baud
• Bits: 8
• Parity: None
• Stop Bits: 1
• Flow Control: None

Application Information

FTDI TTL-232R-RPi cable provides USB to TTL Level UART solutions and is customised for operation specific to the Raspberry Pi.

The Raspberry Pi Community

There is a huge sense of community around Raspberry Pi. The Raspberry Pi site features projects, blogs and downloadable software for you to get stuck into, or even to help spark your ideas. There is also a Forum section where you can discuss topics and ask for help from other Raspberry Pi users. Help Guides and other documentation are available to help you get started on your project. Find all of this information at: https://www.raspberrypi.org/

Specifications
Attribute Value
Interface Function USB to UART
Kit Classification Cable
For Use With Raspberry Pi
Available to back order for despatch 24/02/2020
Price Each
£ 11.97
(exc. VAT)
£ 14.36
(inc. VAT)
Units
Per unit
1 - 1
£11.97
2 - 9
£11.65
10 - 19
£11.34
20 - 49
£11.05
50 +
£10.77
Related Products
The FX3 Super Speed Explorer Kit is enables ...
Description:
The FX3 Super Speed Explorer Kit is enables developers to add USB 3.0 serial interface device functionality to a system. The kit is based on the CYUSB301x family of EZ-USB FX3 USB 3.0 peripheral controllers. A fully accessible ARM9 core with 512 KB of RAM. The FX3 is fully configurable, ...
Power supply, monitoring and analysis in one easy ...
Description:
Power supply, monitoring and analysis in one easy to use and feature-packed product, the Otii by Qoitech is the ultimate tool for any developer aiming to design highly energy efficient IoT projects. •Records currents, voltages and UART logs and displays them in real time as charts and interactive measurements and ...
The Ready for PIC DIP28 Development Board has ...
Description:
The Ready for PIC DIP28 Development Board has been designed to support the development of your applications using 28-pin PIC microcontrollers and features four IDC10 headers that enable connection to a variety of Mikro Elektronika development boards.Features & Benefits of the Ready for PIC DIP28•On-board PIC18F25K22 microcontroller•Prototyping area•Preprogrammed fast UART ...
Xilinx Artix-7 FPGAInternal clock speeds exceeding 450MHz On-chip ...
Description:
Xilinx Artix-7 FPGAInternal clock speeds exceeding 450MHz On-chip analog-to-digital converter (XADC)Programmable over JTAG and Quad-SPI Flash System Features256MB DDR3L with a 16-bit bus @ 667MHz16MB Quad-SPI Flash USB-JTAG Programming circuitry (Micro USB cable not included)Powered from USB or any 7V-15V source System Connectivity10/100 Mbps Ethernet USB-UART Bridge Interaction and Sensory ...