Cypress Semiconductor, USB Power Analyser Evaluation Kit - CY4500

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

CY4500 EZ-PD Protocol Analyzer, Cypress Semiconductor

The CY4500 EZ-PD Protocol Analyzer supports protocol analysis and decoding of the USB-PD (Power Delivery) and USB Type-C specifications packets on the Configuration Channel lines. The analyzer allows debugging of the USB Power Delivery communication. The CY4500 acts as a pass-through for VBUS, VCONN, USB 3.1, USB 2.0 and USB-PD traffic. The cypress.com website includes a free Windows-based GUI software (EZ-PD Analyzer Utility) that can be used to decode the USB-PD messages in real time.

VBUS Voltage and Current monitoring
Message ID based triggering
Debug headers for Configuration Channel, VBUS and SBU
Firmware upgradable for future updates

Kit Contents

EZ-PD Protocol Analyzer Hardware
USB 2.0 Type-A to Micro-B Cable
Jumper Wires (6)
Quick Start Guide

USB (Universal Serial Bus), Cypress Semiconductor

USB is a cable bus supporting data exchange between a host computer and a wide range of simultaneously accessible peripherals. There is a differential signal data interface for transmit and receive communication path. The bus includes power at 5 Volts.

Specifications
Attribute Value
Kit Classification Evaluation Kit
Kit Name USB Power Analyser
Available to back order for despatch 11/12/2019
Price Each
£ 156.52
(exc. VAT)
£ 187.82
(inc. VAT)
Units
Per unit
1 +
£156.52
Related Products
The USB to Serial Bridge Controller provides a ...
Description:
The USB to Serial Bridge Controller provides a single configurable serial channel for UART/I²C/SPI interfaces, with low power consumption in stand-by mode.The CY7C65211 controller integrates CapSense capacitive-touch sensing technology (for touch sensitive key switches), and Battery Charging Detection logic. The controller features up to 8-pins for Inputs/Outputs. USB-Serial Software Development ...
The USB-Serial Bridge Controller offers dual configurable serial ...
Description:
The USB-Serial Bridge Controller offers dual configurable serial channels for UART/I²C/SPI interfaces, with low power consumption in stand-by mode.The CY7C65215 controller integrates CapSense capacitive-touch sensing technology (for touch sensitive key switches) and Battery Charging Detection logic. The controller features up to 19-pins for Inputs/Outputs. USB-Serial Software Development Kit (SDK) at ...
USB Type-C and USB-PD SupportSupports USB PD3.0 Version ...
Description:
USB Type-C and USB-PD SupportSupports USB PD3.0 Version 1.1 Spec includingProgrammable Power Supply ModeConfigurable resistor RDSupports one USB Type-C portLegacy Charging Sink BlockSupports Apple charging 2.4A, USB BC 1.2Integrates all required terminations on D+/D- linesSystem-Level Fault ProtectionVBUS to CC Short ProtectionOn-chip overvoltage protection (OVP)Clocks and OscillatorsIntegrated oscillator eliminating the need ...
The FM0-100L-S6E1B8 MCU Starter Kit enables rapid prototype ...
Description:
The FM0-100L-S6E1B8 MCU Starter Kit enables rapid prototype development, based on the Cypress FM0+ S6E1B-Series, a low-power 32-bit ARM Cortex-M0+ flexible Microcontroller. On-board interfaces include USB host and device, micro-SD Card, accelerometer, stereo codec, potentiometer and an RGB colour LED.The FM0-100L-S6E1B8 Kit features an ARM CMSIS-DAP interface for programming and ...