Pi Supply Amplifier HAT for Raspberry Pi - JustBoom Amp HAT

  • RS Stock No. 122-8185
  • Mfr. Part No. JustBoom Amp HAT
  • Brand Pi Supply
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

Pi Supply Raspberry Pi Hat

The Pi Supply Raspberry Pi HAT is a high-quality audio amplifier specifically designed for the Raspberry Pi. It is as an audio amplifier that includes digital to analogue conversion to eliminate the need for external sound cards or DACs. You can simply stack the plug-and-play add on board (HAT) onto your Raspberry Pi A+, B+, 2B or the new 3B for immediate use. It includes a class-D power amplifier chip with built-in 192kHz/32bit DAC for a peak power output of 2 x 55Watts. The outputs audio over two speaker cable connector blocks accept anything up to 14AWG cable to provide crystal clear audio to either 4 or 8Ohm passive speakers. It also uses the I2S interface for its audio input that reduces CPU load on the Raspberry Pi compared to USB solutions. It is designed to back the power the Raspberry Pi over the 40-pin GPIO header letting you use a single power supply for the entire system.

Features and Benefits

Plug and play compatibility for ease of use
Hardware and software volume control from your Raspberry Pi
Onboard, hardware jumpers for configuring mute and gain settings (jumpers could optionally be changed with switches)
Mute/enable with GPIO22 (can be overridden by using jumper J4)
No soldering required
Mounting hardware included
Optional IR receiver included in the package
Unused GPIO pins still accessible via unpopulated extension header
Fully HAT compliant
Full driver support in Raspbian/NOOBS
Compatible with OSMC/RuneAudio/Volumio/Moode/PiCorePlayer/PiMusicBox/OpenELEC, and others

Applications

Multi-room streaming/local audio player
Interactive art projects with audio requirement
Arcade table projects with high-quality, immersive audio
Streaming (either from cloud or network storage) high-definition audio player
Internet radio player with high-quality stereo audio
Refit old radios with high-quality streaming audio

Certifications

ANSI/ESD S20.20:2014
BS EN 61340-5-1:2007

Specifications
Attribute Value
Interface Function Amplifier
Kit Classification HAT
For Use With Raspberry Pi
150 In stock - FREE next working day delivery available
Price Each
£ 49.99
(exc. VAT)
£ 59.99
(inc. VAT)
Units
Per unit
1 +
£49.99
Related Products
Use between 1 and 6 matrices in your ...
Description:
Use between 1 and 6 matrices in your choice of green and/or red. Perfect for building a retro scrolling message display, a tiny 30-band spectrum analyser, or a retro clock.Micro Dot p HAT also works well with our other p HATs and HATs. You could use it in combination with ...
The USB-UART LP Bridge Controller provides a single ...
Description:
The USB-UART LP Bridge Controller provides a single USB-to-UART interface channel, with low power consumption in stand-by mode.The CY7C65213 controller integrates Battery Charging Detection logic. The controller features up to 8-pins for Inputs/Outputs. USB-Serial Software Development Kit (SDK) available at cypress.com USB-IF Battery Charging specification version 1.2 compliant Ideal for ...
ADC is a common accessory for Raspberry Pi. ...
Description:
ADC is a common accessory for Raspberry Pi. Nowadays many cheap MCUs has built-in ADC, so we make this 8-channel ADC based on STM32F030, which is a cost-effective, low-power ARM Cortex M0 MCU. We breakout 8 channels ADC from the MCU, and integrated 4 analog Grove connector so that you ...
Support Raspberry Pi 2/ 3 B/B+ Zero/4Support seconds,minutes,hours,day ...
Description:
Support Raspberry Pi 2/ 3 B/B+ Zero/4Support seconds,minutes,hours,day of week,month, year Support 24-hour or 12-hour format with AM/PM indicator Low-Power Consumption Two Time-of-Day Alarms Fast (400k Hz) I2C Interface Typical Applications Any applications need Real Time on Raspberry.