Megger MIT310A Insulation & Continuity Tester, 250V Min, 1000V dc Max, 999MΩ Max, CAT III 600V
- RS Stock No.:
- 516-7704
- Mfr. Part No.:
- MIT310A-EN
- Brand:
- Megger
Discontinued
Alternative
This product is not currently available. Here is our alternative recommendation.
Each
£953.00
(exc. VAT)
£1,143.60
(inc. VAT)
- RS Stock No.:
- 516-7704
- Mfr. Part No.:
- MIT310A-EN
- Brand:
- Megger
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Megger | |
| Model Number p | MIT310A | |
| Tester Type | Insulation & Continuity Tester | |
| Maximum Test Voltage | 1000V dc | |
| Minimum Test Voltage | 250V | |
| Maximum Insulation Resistance Measurement | 999MΩ | |
| Display Type | Analogue | |
| Test Current | 1mA | |
| Battery Life | 5000 5-Second Tests | |
| Battery Type | AA | |
| Power Source | Battery | |
| Minimum Operating Temperature | -10°C | |
| Maximum Operating Temperature | +60°C | |
| Safety Category Voltage | 600V | |
| Safety Category Level | CAT III | |
| Safety Category | CAT III 600V | |
| Length | 203mm | |
| Plug Type | Type G - British 3-pin | |
| Weight | 980g | |
| Width | 148mm | |
| Dimensions | 203 x 148 x 78mm | |
| Height | 78mm | |
| Select all | ||
|---|---|---|
Brand Megger | ||
Model Number p MIT310A | ||
Tester Type Insulation & Continuity Tester | ||
Maximum Test Voltage 1000V dc | ||
Minimum Test Voltage 250V | ||
Maximum Insulation Resistance Measurement 999MΩ | ||
Display Type Analogue | ||
Test Current 1mA | ||
Battery Life 5000 5-Second Tests | ||
Battery Type AA | ||
Power Source Battery | ||
Minimum Operating Temperature -10°C | ||
Maximum Operating Temperature +60°C | ||
Safety Category Voltage 600V | ||
Safety Category Level CAT III | ||
Safety Category CAT III 600V | ||
Length 203mm | ||
Plug Type Type G - British 3-pin | ||
Weight 980g | ||
Width 148mm | ||
Dimensions 203 x 148 x 78mm | ||
Height 78mm | ||
RoHS Status: Not Applicable
- COO (Country of Origin):
- GB
MIT 300 Series Insulation & Continuity Testers
A range of insulation testers that meet the relevant requirements of EN61557, BS7671, HD 384, IEC 364 and VDE 0413 for applications in all aspects of electrical contracting, building maintenance, testing, inspection and servicing.
20mm LCD display with true analogue response
Tough rubber armoured case with self contained display cover that locks away underneath the instrument during use
Designed to hang comfortably around the neck for hands-free, or for bench use
Automatic 200mA fast continuity test on connection to the circuit
Lead resistance nulling on continuity allows for use of fused test probes
Automatic discharge of circuit under test
Safety input terminal interlock - prevents unsafe connection of test leads
Intelligent Safety System - even if connected to a live circuit whilst on continuity setting the tester will remain safe and undamaged
Live voltage warning alerts the operator when a circuit voltage over 25V exists when insulation testing
Safety lockout prevents the test from operating when the circuit voltage is > 50V
Continuity check - prevents a continuity test or buzzer test on a live circuit
3 phase safe - will not be damaged if connected across phases
Locking test button
Meets the requirement of BS EN 61010-1 for safe connection to a 440V Installation Category III supply (600V Phase to Earth)
IP54
Tough rubber armoured case with self contained display cover that locks away underneath the instrument during use
Designed to hang comfortably around the neck for hands-free, or for bench use
Automatic 200mA fast continuity test on connection to the circuit
Lead resistance nulling on continuity allows for use of fused test probes
Automatic discharge of circuit under test
Safety input terminal interlock - prevents unsafe connection of test leads
Intelligent Safety System - even if connected to a live circuit whilst on continuity setting the tester will remain safe and undamaged
Live voltage warning alerts the operator when a circuit voltage over 25V exists when insulation testing
Safety lockout prevents the test from operating when the circuit voltage is > 50V
Continuity check - prevents a continuity test or buzzer test on a live circuit
3 phase safe - will not be damaged if connected across phases
Locking test button
Meets the requirement of BS EN 61010-1 for safe connection to a 440V Installation Category III supply (600V Phase to Earth)
IP54
MIT310A
Moving coil display
MIT320 benefits from the following additional features:
Backlit display and range selection ideal for low light environment
Selectable insulation alarm limit for fast go - no go testing
Selectable continuity alarm limit for fast go - no go testing
Resistance measurement range to 1 MΩ
SP3 switched probe supplied for one handed operation
SP1000 illuminated switched probe with ultra-bright LED light available separately
Selectable insulation alarm limit for fast go - no go testing
Selectable continuity alarm limit for fast go - no go testing
Resistance measurement range to 1 MΩ
SP3 switched probe supplied for one handed operation
SP1000 illuminated switched probe with ultra-bright LED light available separately
Note
RS is an authorised Megger distributor. Purchased though RS this product is eligible for the Megger extended 3 Year warranty
Supplied with
instructions, 2 wire test lead set with crocodile clips, 8 x AA alkaline batteries, neck strap & carry case.
