ITT Cannon Circular Connector, 31 Contacts, Panel Mount, Socket, Female, IP67, Trident Neptune Series

View this category
Save 18% when you buy 40 units

Subtotal (1 unit)*

£24.64

(exc. VAT)

£29.57

(inc. VAT)

Add to Basket
Select or type quantity
Temporarily out of stock
  • 200 unit(s) shipping from 05 December 2025
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units
Per unit
1 - 19£24.64
20 - 39£22.17
40 +£19.96

*price indicative

Alternative

This product is not currently available. Here is our alternative recommendation.

presentation
ITT Cannon Circular Connector, 31 Contacts, Panel Mount, Socket, Female, IP67, Trident Neptune Series
RS Stock No.
167-9635

Each

£24.27

(exc. VAT)

£29.12

(inc. VAT)

RS Stock No.:
273-5584
Mfr. Part No.:
TN7S24-1219S1L / 192900-0038
Brand:
ITT Cannon
Find similar products by selecting one or more attributes.
Select all

Brand

ITT Cannon

Number of Contacts

31

Mounting Type

Panel Mount

Connector Size

Standard

Plug/Socket

Socket

Contact Gender

Female

Termination Method

Crimp

IP Rating

IP67

Series

Trident Neptune

Body Orientation

Straight

Housing Material

Polymer

Contact Plating

Nickel

Minimum Operating Temperature

-55°C

Maximum Operating Temperature

+105°C

Contact Material

Copper

COO (Country of Origin):
HU

Panel Plug and Socket Shells, Jam Nut Fixing


Mounted from the rear of a panel via a single "D" hole. May also be used for in-line connections. Includes "O" ring interface seals, rubber cable seals, seal securing nuts and plastic jam nut.Can be used for in-line connections.


Neptune


Based on Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, they feature a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available.,To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires : 2.7 to 4.0mm.,Number of contacts shown as power/signal eg 2//13.

Related links