RS PRO Red LED Reflector Bulb, Midget Groove Base, 6mm Diameter, 40mcd
- RS Stock No.:
- 206-069
- Brand:
- RS PRO
Currently unavailable
We don’t know if this item will be back in stock, it is being discontinued by the manufacturer.
Alternative
This product is not currently available. Here is our alternative recommendation.
Each
£6.17
(exc. VAT)
£7.40
(inc. VAT)
- RS Stock No.:
- 206-069
- Brand:
- RS PRO
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | RS PRO | |
| Light Output Colour | Red | |
| Intensity | 40mcd | |
| Lamp Base | Midget Groove | |
| Chip Type | Multichip | |
| Diameter | 6mm | |
| Length | 15.25mm | |
| Viewing Angle | 180 ° | |
| Peak Wavelength | 630nm | |
| Current Rating | 30mA | |
| Life Hours | 100000h | |
Select all | ||
|---|---|---|
Brand RS PRO | ||
Light Output Colour Red | ||
Intensity 40mcd | ||
Lamp Base Midget Groove | ||
Chip Type Multichip | ||
Diameter 6mm | ||
Length 15.25mm | ||
Viewing Angle 180 ° | ||
Peak Wavelength 630nm | ||
Current Rating 30mA | ||
Life Hours 100000h | ||
- COO (Country of Origin):
- GB
T1 3/4 midget groove (ac/dc) multi-chip LEDs
LED lamps contain 6 LED chips, full wave bridge rectifier and a current limiting resistor
Bi-polar dc. connections
Bi-polar dc. connections
Multi-Chip LEDs
Multi-chip LEDs are semi-conducting alternatives to incandescent filament lamps. Construction consists of standard filament lamp bases incorporating a current limiting resistor and a cluster of LED chips bonded onto a substrate. Multi-chip LEDs have many advantages over standard filament lamps.
Very high immunity to shock and vibration
Current consumption is between 50 and 65% lower
Lower operating temperatures
Current consumption is between 50 and 65% lower
Lower operating temperatures
Note
The operating voltage must not be exceeded by more than 10% as this will result in reduced life expectancy.