Lapp Black, 35 mm² Welding Cable H01N2-D Series , 50m
- RS Stock No.:
- Mfr. Part No.:
- COO (Country of Origin):
|Reel(s)||Per Reel||Per Metre*|
H01N2-D Welding Cable
From Lapp, this harmonised H01N2-D cable is for the transmission of high currents and low voltages, and is typically for use with arc welding machines. This durable and flexible rubber cable is oil resistant, so can be used in demanding environments. It is also UV and cold resistant, and is suitable for some outdoor use, as well as in dry or damp interiors.
This power and control cable has a harmonized bar copper wire, and a synthetic film separator underneath a rubber compound sheath.
Features and Benefits
Flame-retardant according IEC 60332-1-2
Operating temperature for flexible use: Flexible use: -25°C to +85°C
This Lapp normative arc-welding cable is for transmitting currents from an electric welding device to a welding tool, and must be used only under consideration of EN 50565-2.
406-994 is a Welding Cable with a 16 mm Outer Diameter
406-984 is a Welding Cable with a 25 mm Outer Diameter
406-988 is a Welding Cable with a 35 mm Outer Diameter.
HD22.6 S2 resp. VDE 0282 part 6
|Cross Sectional Area||35 mm²|
|American Wire Gauge||2 AWG|
|Core Strands||1100/0.21 mm|
|Voltage Rating||100 V|
|Maximum Operating Temperature||+85°C|
|Minimum Operating Temperature||-25°C|
|Insulation Wall Thickness||2mm|
|Standards Met||HD 22.6 S2 resp. VDE 0282 part 6|